Dell 2950 E2016 Int Controller, E2017 Timer Fail, E2018 Prog Timer, E2019 Parity Error

Table 1-6. LCD Status Messages (continued)

Code	Text	Causes	Corrective Actions
E2016	Int Controller	Interrupt controller failure.	See "Getting Help" on page 147.
E2017	Timer Fail	Timer refresh failure.	See "Getting Help" on page 147.
E2018	Prog Timer	Programmable interval timer	See "Getting Help" on page 147.
		error.
E2019	Parity Error	Parity error.	See "Getting Help" on page 147.
E201A	SIO Err	SIO failure.	See "Getting Help" on page 147.
E201B	Kybd Controller	Keyboard controller failure.	See "Getting Help" on page 147.
E201C	SMI Init	System management interrupt	See "Getting Help" on page 147.
		(SMI) initialization failure.
E201D	Shutdown Test	BIOS shutdown test failure.	See "Getting Help" on page 147.
E201E	POST Mem Test	BIOS POST memory test failure.	See "Troubleshooting System
			Memory" on page 120. If problem
			persists, see "Getting Help" on
			page 147.
E201F	DRAC Config	Dell remote access controller	Check screen for specific error
		(DRAC) configuration failure.	messages.
			Ensure that DRAC cables and
			connectors are properly seated. If
			problem persists, see your DRAC
			documentation.
E2020	CPU Config	CPU configuration failure.	Check screen for specific error
			messages.
E2021	Memory	Incorrect memory configuration.	Check screen for specific error
	Population	Memory population order	messages. See "Troubleshooting
		incorrect.	System Memory" on page 120.
E2022	POST Fail	General failure after video.	Check screen for specific error
			messages.

E2110 MBE Crd # DIMM ## & ##

One of the DIMMs in the set	See "Troubleshooting System
implicated by "## & ##" has	Memory" on page 120.
had a memory multi-bit error
(MBE). If no memory card is
present, the "Crd #" string is left
out of the message.

About Your System

25