BT 50 manual Automatic print quality test, Check Print OUT = Exit 0 = Repeat

Page 14

PaperJet 50 User Guide 26/7/01 10:18 am Page 12 user guide – Edition 3 – 29.8.00

Pull the cartridge towards the front of the machine until you hear it click into position.

Close the cover.

If the display continues to show CHECK PRINT HEAD the cartridge may not be installed properly. Open the cover and check that the cartridge is correctly orientated and clicked into position.

Click into position

NOTE

To replace the cartridge when it runs out of ink, follow the instructions in the Maintenance Section on page 44.

Should the message persist, you may need to clean the electrical contacts and the carriage (see ‘To clean the print head’, page 46).

9Automatic print quality test page

Your PaperJet 50 automatically cleans the print nozzles and prints a test page. Once printed, the display shows

CHECK PRINT OUT

1 = EXIT 0 = REPEAT

The printed sheet contains the following:

•a numbered scale, to check ink flow and the electrical circuits on the print head.

•a set of graphics and text to assess print quality.

Check the numbered scale for interruptions and the black areas for horizontal white lines. If none are present, the print head is installed correctly and working normally.

1 Press 1 if the test print is acceptable. Or

0Press 0 to repeat the test.

If there is still a problem after printing three test pages try:

•changing the paper you are using, it may be too porous.

•removing and re-installing the print cartridge.

•cleaning the electrical contacts and print nozzles (see ‘To clean the print head’, page 46).

•replace the print head.

12

Image 14

Contents User Guide PaperJetPage Page At a glance Control panelPaperJet Print head holder Optical scanner Key features This guide For your records IntroductionUnpacking your PaperJet Safety information Connect the telephone line cord Setting upFit the paper support Automatic RX Check Print Head Connect the mains powerLoad paper Shows FAX SET If necessary, check the paper size settingInstall the starter print cartridge Shows PrinterAutomatic print quality test Check Print OUT = Exit 0 = RepeatEnter your name and fax number Shows InstallationSet the date and time Display shows Format DD/MM/YYShows FAX SET-UP Display shows Various SettingsTo set the position of your fax header Sending faxes Using your PaperJetSetting the contrast and resolution To dial and hear the progress of your fax call To select the default resolution settingTo display Date and Time To display Various Settings To send a faxTo redial the last number To dial using the handsetTo switch document retransmission on/off Hhmm To send a fax at a pre-set time delayed faxingTo change the details of a pre-set fax TX ATTo fax from memory To change, re-send or cancel a stored documentTo broadcast a document FAX Number . IfReceiving faxes ANOTHER? YES Using the one-touch memoriesDial To store a one touch entryTo store a speed dial entry Using the speed-dial memoriesTo edit or delete a one-touch entry To send a one-touch fax FAX Call Code or To edit or delete a speed dial entryTo send a speed dial fax Reports and lists REP on Delay List OFFReport Last TX Report BROAD. REP Activity ReportMaking and receiving phone calls To print the configuration, speed dial and one-touch listsSET UP To print the set-up listTEL Call Code or To make a speed dial callTo put a caller on hold To stop copying Copying documentsTo copy a document 100% Text NormalTo set the print area of a document Additional featuresTo set the print quality High QualDisplay shows TEL.LINE SET-UP To adjust the ringer volumeTo receive a document longer than the paper size On and OFFTo change the remote start code To adjust the duration of the phone call alert beepsStart TIMER20 PstnInstallation To adjust the speed a fax is sent atTo adjust the loudspeaker volume Monitor onTo poll a document from another fax machine To switch ECM mode on/offPolling Polling TX SET To display Cancel SETTING?To change a polling time and number NumberTo set up your answering machine Connecting an answering machineTo set the receive mode If your fax machine interrupts when messages are being left To change the silence detection timePBX Connecting to a switchboardTo set the dialling mode and access number EXT. Line PrefixUsing the External button To switch dialling mode during a callHelp Your machine prints out completely blank copies Your machine does not receive faxes automaticallyYou cannot print faxes or copy documents Error codes Receiver does not AnswerError messages Beeps Memory capacityChanging the printhead/cartridge assembly MaintenanceCleaning your PaperJet Changing the printhead/cartridgeChanging the ink cartridge Manually cleaning the printhead contacts To clean the print head and nozzlesShows Head Maintenance NEW Head OFFCleaning the print head pad Cleaning the optical scannerPress Removing jammed pagesDimensions Technical informationTTE Index Page Page Offices worldwide