BT 50 To select the default resolution setting, To dial and hear the progress of your fax call

PaperJet 50 User Guide 26/7/01 10:18 am Page 16 user guide – Edition 3 – 29.8.00

To select the default resolution setting

NOTE

Function

F

Start

Function

F

Start

Volume

Start

Stop

Your machine is pre-set to STD resolution for faxing and copying. You can change this setting so that the resolution is automatically set to FINE.

When the machine is in standby

Press until the display shows FAX SET-UP

To display DATE AND TIME

To display VARIOUS SETTINGS

Press until the display shows TX RESOL. STD

To switch between FINE and STD.

To confirm.

To return to standby.

If you make a mistake when entering a number, press the < > buttons to move the cursor over the digit and enter the correct digit. To delete the digit press the Clear button.

NOTE

All dialling is shown using 0-9keypad. You can also use one-touch or speed dialling if they are set.

To dial and hear the progress of your fax call

Place document face down in the document feeder.

To send a fax

Place document face down in the document feeder.

If necessary set the Contrast and

Resolution settings.

0-9	Use the keypad to dial the number you
	want.
	Press the Start button. The number is
Start	dialled before your fax is scanned and sent.
	When the fax has been sent, the display
	shows TX COMPLETED to confirm a
	successful transmission.

If necessary set the Contrast and

Resolution settings.

	Press the Monitor button. You hear the
Monitor	dialling tone over the loudspeaker.

0-9Use the keypad to dial the number you want.

When you hear the far end machine

Start respond press the Start button. Your fax is scanned and sent.

When the fax has been sent, the display shows TX COMPLETED to confirm a successful transmission.

16