BT 50 manual Error messages

Page 44

PaperJet 50 User Guide 26/7/01 10:20 am Page 42 user guide – Edition 3 – 29.8.00

Error messages

If you see an error message on the display, check here for its meaning and solution. Messages are listed in alphabetical order.

AUTOREDIAL nnn

Last fax call failed. Your machine will redial after nnn seconds.

CHECK DOCUMENT, PRESS

The document is not going through properly. Remove and re-insert the document in the document feeder. Press the Stop button to return to standby and send again.

CHECK PAPER, PRESS

You have run out of paper. Add paper and press the Stop button to return to standby.

Or

The paper is not going through properly. Remove and re-insert the paper. Press the Stop button to return to standby.

CHECK PRINT HEAD

The print head has not been installed or has been installed incorrectly. Install the print head again.

Some print nozzles may be damaged, reducing print quality. Clean the print head (see page 46).

COPY INTERRUPTED

The Stop button has been pressed.

Or

There was a problem during copying and it could not be printed. Check the type of problem on the display and clear it.

COVER OPEN

Close the printer compartment cover.

DOC IN MEMORY

A received fax is stored in the memory because it could not be printed right away. Check the problem on the display and clear it.

LAST TX ERR. XX

The last fax sent was not completed successfully. Press the Last TX button to send again or press the Stop button to return your machine to standby.

MEMORY FULL

Because of a printing problem (no paper, paper jam, no ink, cover open etc) documents have been received into the memory. Resolve the printing problem and the documents will automatically be printed and the memory cleared.

NOT PROGRAMMED

You have chosen a one-touch button or speed dial code which does not have an entry stored.

OUT OF INK

The ink in the cartridge has run out. Change the cartridge (see Changing the print head/cartridge, page 44).

PAPER ERROR, PRESS

Paper jam. Press the Stop button and, if the paper sheet is not ejected automatically, check where it is jammed and remove it. (See Removing jammed pages, page 48.)

42

Image 44
Contents User Guide PaperJetPage Page At a glance Control panelPaperJet Print head holder Optical scanner Key features This guide For your records IntroductionUnpacking your PaperJet Safety information Connect the telephone line cord Setting upFit the paper support Automatic RX Check Print Head Connect the mains powerLoad paper If necessary, check the paper size setting Install the starter print cartridgeShows FAX SET Shows PrinterAutomatic print quality test Check Print OUT = Exit 0 = RepeatShows Installation Set the date and timeEnter your name and fax number Display shows Format DD/MM/YYShows FAX SET-UP Display shows Various SettingsTo set the position of your fax header Sending faxes Using your PaperJetSetting the contrast and resolution To select the default resolution setting To display Date and Time To display Various SettingsTo dial and hear the progress of your fax call To send a faxTo redial the last number To dial using the handsetTo switch document retransmission on/off To send a fax at a pre-set time delayed faxing To change the details of a pre-set faxHhmm TX ATTo change, re-send or cancel a stored document To broadcast a documentTo fax from memory FAX Number . IfReceiving faxes Using the one-touch memories DialANOTHER? YES To store a one touch entryTo store a speed dial entry Using the speed-dial memoriesTo edit or delete a one-touch entry To send a one-touch fax FAX Call Code or To edit or delete a speed dial entryTo send a speed dial fax Reports and lists Delay List OFF ReportREP on Last TX Report BROAD. REP Activity ReportTo print the configuration, speed dial and one-touch lists SET UPMaking and receiving phone calls To print the set-up listTEL Call Code or To make a speed dial callTo put a caller on hold Copying documents To copy a documentTo stop copying 100% Text NormalAdditional features To set the print qualityTo set the print area of a document High QualTo adjust the ringer volume To receive a document longer than the paper sizeDisplay shows TEL.LINE SET-UP On and OFFTo adjust the duration of the phone call alert beeps Start TIMER20To change the remote start code PstnTo adjust the speed a fax is sent at To adjust the loudspeaker volumeInstallation Monitor onTo poll a document from another fax machine To switch ECM mode on/offPolling To display Cancel SETTING? To change a polling time and numberPolling TX SET NumberTo set up your answering machine Connecting an answering machineTo set the receive mode If your fax machine interrupts when messages are being left To change the silence detection timeConnecting to a switchboard To set the dialling mode and access numberPBX EXT. Line PrefixUsing the External button To switch dialling mode during a callHelp Your machine prints out completely blank copies Your machine does not receive faxes automaticallyYou cannot print faxes or copy documents Error codes Receiver does not AnswerError messages Beeps Memory capacityMaintenance Cleaning your PaperJetChanging the printhead/cartridge assembly Changing the printhead/cartridgeChanging the ink cartridge To clean the print head and nozzles Shows Head MaintenanceManually cleaning the printhead contacts NEW Head OFFCleaning the print head pad Cleaning the optical scannerPress Removing jammed pagesDimensions Technical informationTTE Index Page Page Offices worldwide