Denon DN-HC4500 Seamless LOOP/HOT START/STUTTER, Seamless Loop/Hot Start/Stutter A1,A2 buttons

6	SEAMLESS LOOP/HOT START/STUTTER				Playing Seamless Loops
					• When the B point for A1 is detected
Seamless Loop/Hot Start/Stutter (A1,A2 buttons)					after playback started from A1 point,
					playback returns to A1 point with
	Operation display			4	seamless. While A1 to B looping, B
	(refer to the section describing the display)				point for A2 ignored.
					• When the B point for A2 is detected
					after playback started from A2 point,
					playback returns to A2 point with
					seamless. While A2 to B looping, B
					point for A1 ignored.
					Exit/Reloop
					r In Seamless Loop
					playback, you can force
					exit from or return to
					the loop.
					EXIT:
				5	While the Seamless Loop playback, push
					the EXIT/RELOOP button to exit from
					loop. DN-D4000/D4500/BU4500 continues
	t, y	e, y			playback after the B point.
					RELOOP:
	q, w, y		r
					When the EXIT/RELOOP button is
					pushed after exit the loop, Seamless
	Setting the A point		Setting the B point for Seamless Loop		Loop playback resumes from the A point.

	(loading the Hot Start data)		e When the B button is
	q Push the A1 or A2		pushed after setting
	button to set the A		the A point or after
1	point and Hot Start data		starting Hot start
	loading starts.		playback, the B point is
	• A1 and A2 buttons can be used		set and Seamless Loop playback starts
	separately for each Hot Start.	3	from the A point.
	• When an A point is set, the corresponding		• The B button works with respect to the
	A button and “ ” display light and that		A point operated before the B button
	button is set to the Hot Start mode.		was pushed.
	Starts Hot Start		• If the B button is pushed during Seamless
			Loop playback or after EXIT playback, the
	w When A1 or A2 button
			B point moves to the point at which the
2	is pushed, Hot Start
			button was pushed.
	playback starts from
			• When the B point is set, the B and “ ”
	the corresponding A
			displays light.
	point.

ENGLISH

Stutter

• A1 and A2 points can be also used for Stutter playback.

tTo enable stutter

6 playback, push FLIP

button for A1/A2 buttons, then “ ” display turns off.

Press the FLIP button to switch between the Hot Start/Seamless Loop and Stutter modes.

Clear the A1/A2 point

yWhile pressing the FLIP button, push the A1 or A2 button to clear the corresponding A and B points.

Or push the FLIP button for more than 1 sec to clear both A1 and A2 points at once.

7	Quickly pressing the “FLIP” button first
	and then A1, A2 or B buttons will clear
	these points individually.

7

ENGLISH