6
Press the Execute button to begin updating the version.
Once version updating is completed, “Version up was completed.” is displayed.
The following is displayed on the device’s panel during version updating:
On Deck1:
Once version updating is completed:
If version updating has failed, “Version up was not completed.” is displayed and the screen returns to as it was before the Execute button was pressed. Press the Execute button again.
ENGLISH
Press the OK button to finish.
The following is displayed on the device’s panel:
On Deck2:
7
Quit the updating program and turn off the
NOTE:
•Do not turn off the set’s power or disconnect the cable connecting it to the computer during loading or version updating. Also, do not press any buttons on the set or any keys on the computer’s keyboard.
•If an error message appears during loading or version updating, repeat from step 1.
Other error messages are as follows:
“File is invalid”
When the loaded update file was invalid.
“Load failed. Check the connection, and retry”
When a transfer error has occurred during transfer of the update file to the device.
“Loaded data is invalid. Check the file.”
When a SUM check error has occurred after transfer of the update file to the device.
“Version up was not completed.”
When version updating was not completed normally.
13
ENGLISH