Denon DN-HC4500 manual Starting Up, About the control panel screen

ENGLISH

Starting Up

When the DENON DJ ASIO driver’s “ASIO Control Panel” is called out from the host application, the DENON DJ ASIO driver displays the ASIO control panel.

tSampling Rate

The sampling rate selection is displayed here. The frequencies with which the DENON DJ ASIO driver is compatible are as follows:

• 44.1kHz/48kHz/96kHz

About the control panel screen

y t

q	w	e	r
q Device		e Audio Buffer Size

yDevice Description

This is the area in which information for the device selected in the device information list is displayed.

The following are displayed:

•Device name

•Unit number

•Software version

•Audio input channels

•Audio output channels

•Sampling frequency

•Max bit resolution

•Audio buffer size

NOTE:

If the device’s information cannot be acquired, “-” (hyphens) are displayed for all items.

This is the area in which the list of compatible DENON DJ devices is displayed automatically. (Example: DN-HC4500-1)

•Select the device to be set from the list to display the selected device’s current settings on the right.

•If the device is double-clicked, the status of the ASIO device specifications device switches between enabled and disabled.

NOTE:

•Only one device can be selected.

•The device currently being used as the ASIO device is displayed in bold characters. (Multiple devices can be enabled simultaneously.)

wEnable/Disable

This button is for activating the device selected in the device display list as the ASIO device.

Use this slider to adjust the buffer size.

NOTE:

•The range of values is 88 to 2048 (sample units), in steps of 1 ms.

•When multiple devices are activated, the settings of all the active devices are shared.

rOK/Cancel

OK:

Use this button to close the ASIO control panel, reflecting the changes to the settings.

Cancel:

Use this button to close the ASIO control panel without reflecting the changes to the settings.

10

ENGLISH