ENGLISH
Updating procedure
Drag and drop the update file to the “DENON DJ Upgrade program” screen. The
The following is displayed on the device’s panel:
1
Connect the computer by USB cable.
Turn on the device’s power in the update mode.
Turning on the power in the update mode:
Press the BACK and SOURCE buttons simultaneously on Deck1 or Deck2.
The following appears on the device’s panel display:
If the device is not connected or not in the update mode at this time, the screen shown below is displayed.
If the update file has not been loaded, “File is not ready.” is displayed.
Load button can now be selected.
4
5
During file transfer:
on Deck1
Once file transfer is finished;
(Left side: Old version; Right side: New version)
Once file transfer is finished, press the OK
on Deck1 |
|
|
| The version information | |||||||||
2 |
|
|
|
|
|
|
|
|
|
|
| is displayed. | |
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
on Deck2
If the device is not yet connected, the following appears on the device’s panel display:
on Deck2
Launch the
3
Current version information
The identified device name is displayed.
3
Update file not loaded
The Load button can be selected.
Press the Load button to transfer the update file.
5
button. The Execute button is now enabled (can be pressed).
12
ENGLISH