Monarch 9402, 9401 manual Backing Paper Take-up Reel

Page 14

9401/9402 Equipment Manual

3.If backing paper isn't rewound on the backing paper take-up reel, manually rewind and remove the old supply roll.

Backing Paper

Take-up Reel

NOTE: Change the ribbon when loading new supplies, if necessary (see "Loading the Ribbon").

4.If the backing paper is rewound on the backing paper take-up reel, loosen the old supplies enough to tear the backing paper where shown. Manually rewind and remove the supply roll.

Tear Backing	Backing Paper
Paper Here	Take-up Reel

Image 14

Contents Equipment Manual Canadian D.O.C. Warning Table of Contents 9401/9402 Equipment Manual Introduction What action you should take Installing the Printer 9401/9402 Equipment Manual Using the Keys On the KeypadOn the Computer Keyboard Loading Supplies − in one strip see Continuous PrintingSupply Loading Diagram Continuous Printing Backing Paper Take-up Reel Wire Clip Feed Supply On-Demand Printing Tear backing paper here Backing Paper Take-up Reel Slide the supply guide to the top of the supply guide roller Loop the backing paper back through the platen unit as shown Printhead SupplyLever Guide 9401/9402 Equipment Manual Loading the Ribbon Remove the old ribbon by pulling the wire clips as shown Core Ribbon Take-up Reel Cleaning the Printhead and Platen Roller Lightly moisten a cotton swab with rubbing alcohol Replacing the Fuse 9401/9402 Equipment Manual Troubleshooting Problem Corrective ActionProblem Corrective Action Troubleshooting 9401/9402 Equipment Manual Specifications PrinterSupplies Page U.S.A Canada