Monarch 9402, 9401 manual Remove the old ribbon by pulling the wire clips as shown

Page 24

9401/9402 Equipment Manual

4.Remove the old ribbon by pulling the wire clips as shown.

Wire Clip

Delivery

Reel

Ribbon

Take-up

Reel

5.Remove the ribbon cores from the wire clips and discard them.

6.Place the wire clips back on the ribbon take-up reel and delivery reel.

7.Remove the new ribbon from the package.

8.Place the full delivery core on the delivery reel as shown.

NOTE: The delivery reel feeds the ribbon in a clockwise direction. The ribbon take-up reel winds the ribbon in a counterclockwise direction.

20

Image 24

Contents Equipment Manual Canadian D.O.C. Warning Table of Contents 9401/9402 Equipment Manual Introduction What action you should take Installing the Printer 9401/9402 Equipment Manual Using the Keys On the KeypadOn the Computer Keyboard Loading Supplies − in one strip see Continuous PrintingSupply Loading Diagram Continuous Printing Backing Paper Take-up Reel Wire Clip Feed Supply On-Demand Printing Tear backing paper here Backing Paper Take-up Reel Slide the supply guide to the top of the supply guide roller Loop the backing paper back through the platen unit as shown Printhead SupplyLever Guide 9401/9402 Equipment Manual Loading the Ribbon Remove the old ribbon by pulling the wire clips as shown Core Ribbon Take-up Reel Cleaning the Printhead and Platen Roller Lightly moisten a cotton swab with rubbing alcohol Replacing the Fuse 9401/9402 Equipment Manual Troubleshooting Problem Corrective ActionProblem Corrective Action Troubleshooting 9401/9402 Equipment Manual Specifications PrinterSupplies Page U.S.A Canada