Monarch 9402, 9401 manual Tear backing paper here Backing Paper Take-up Reel

Page 18

9401/9402 Equipment Manual

4.If backing paper is rewound on the backing paper take-up reel, loosen the old supplies enough to tear the backing paper where shown, then manually rewind and remove the supply roll.

Tear backing paper here

Backing Paper

Take-up Reel

5.Pull the wire clip off the backing paper take-up reel as shown below.

Wire

Clip

6.Slide the backing paper off the wire clip.

7.Replace the wire clip on the backing paper take-up reel.

Image 18

Contents Equipment Manual Canadian D.O.C. Warning Table of Contents 9401/9402 Equipment Manual Introduction What action you should take Installing the Printer 9401/9402 Equipment Manual Using the Keys On the KeypadOn the Computer Keyboard Loading Supplies − in one strip see Continuous PrintingSupply Loading Diagram Continuous Printing Backing Paper Take-up Reel Wire Clip Feed Supply On-Demand Printing Tear backing paper here Backing Paper Take-up Reel Slide the supply guide to the top of the supply guide roller Loop the backing paper back through the platen unit as shown Printhead SupplyLever Guide 9401/9402 Equipment Manual Loading the Ribbon Remove the old ribbon by pulling the wire clips as shown Core Ribbon Take-up Reel Cleaning the Printhead and Platen Roller Lightly moisten a cotton swab with rubbing alcohol Replacing the Fuse 9401/9402 Equipment Manual Troubleshooting Problem Corrective ActionProblem Corrective Action Troubleshooting 9401/9402 Equipment Manual Specifications PrinterSupplies Page U.S.A Canada