Monarch 9402, 9401 manual Ribbon Take-up Reel

Page 26

9401/9402 Equipment Manual

13.Manually turn the ribbon take-up reel as shown until the ribbon is tight. Make sure the ribbon is not wrinkled or bunched.

Ribbon Take-up

Reel

14.Slide the supply through the printhead and up to the feed mark, as described in "Loading Supplies."

15.Close the printhead by turning the printhead lever as shown.

Printhead

Lever

16.Close the printer cover.

22

Image 26

Contents Equipment Manual Canadian D.O.C. Warning Table of Contents 9401/9402 Equipment Manual Introduction What action you should take Installing the Printer 9401/9402 Equipment Manual Using the Keys On the KeypadOn the Computer Keyboard Loading Supplies − in one strip see Continuous PrintingSupply Loading Diagram Continuous Printing Backing Paper Take-up Reel Wire Clip Feed Supply On-Demand Printing Tear backing paper here Backing Paper Take-up Reel Slide the supply guide to the top of the supply guide roller Loop the backing paper back through the platen unit as shown Printhead SupplyLever Guide 9401/9402 Equipment Manual Loading the Ribbon Remove the old ribbon by pulling the wire clips as shown Core Ribbon Take-up Reel Cleaning the Printhead and Platen Roller Lightly moisten a cotton swab with rubbing alcohol Replacing the Fuse 9401/9402 Equipment Manual Troubleshooting Problem Corrective ActionProblem Corrective Action Troubleshooting 9401/9402 Equipment Manual Specifications PrinterSupplies Page U.S.A Canada