Monarch 9401, 9402 manual On-Demand Printing

Page 17

4. Loading Supplies

On-Demand Printing

1.Open the printer cover by lifting the handle and pulling it completely around the top of the printer.

2.Move the printhead lever as shown to open the printhead.

Printhead

Lever

Handle

NOTE: If you are loading supplies for the first time, skip steps 3 - 7.

3.If backing paper is not rewound on the backing paper take-up reel, manually rewind and remove the old supply roll.

Backing Paper

Take-up Reel

13

Image 17

Contents Equipment Manual Canadian D.O.C. Warning Table of Contents 9401/9402 Equipment Manual Introduction What action you should take Installing the Printer 9401/9402 Equipment Manual On the Keypad Using the KeysOn the Computer Keyboard − in one strip see Continuous Printing Loading SuppliesSupply Loading Diagram Continuous Printing Backing Paper Take-up Reel Wire Clip Feed Supply On-Demand Printing Tear backing paper here Backing Paper Take-up Reel Slide the supply guide to the top of the supply guide roller Loop the backing paper back through the platen unit as shown Printhead SupplyLever Guide 9401/9402 Equipment Manual Loading the Ribbon Remove the old ribbon by pulling the wire clips as shown Core Ribbon Take-up Reel Cleaning the Printhead and Platen Roller Lightly moisten a cotton swab with rubbing alcohol Replacing the Fuse 9401/9402 Equipment Manual Problem Corrective Action TroubleshootingProblem Corrective Action Troubleshooting 9401/9402 Equipment Manual Printer SpecificationsSupplies Page U.S.A Canada