Monarch 9402, 9401 manual Supplies

Page 36

9401/9402 Equipment Manual

Relative humidity: Operating

10% to 80% (no condensation)

 

Storage

5% to 90%

Ribbon widths:

1.26 inches (32.0 mm)

 

1.57 inches (39.88 mm)

 

2.10 inches (53.34 mm)

Ribbon length:

308.4 feet (94 meters)

Ribbon storage:

41˚F to 95˚F (5˚C to 35˚C). DO NOT leave

 

ribbons in direct sunlight, high temperatures,

 

or high humidity.

Print speed:

2 inches (51.0 mm) per second

Print image

 

 

length:

(9401) the first 6 inches of the tag (153 mm)

 

(9402) the first 4 inches of the tag (102.0 mm)

width:

2 inches

 

Supplies

Supply types:

Thermal transfer or thermal direct

 

(tags or labels)

Width:

Maximum

2.5 inches (63.5 mm)

 

Minimum

0.75 inches (19.05 mm)

Length:

Maximum

9 inches (228.6 mm)

 

Minimum

0.75 inches (19.05 mm)

Supply thickness:

Maximum

10 mil

 

Minimum

6 mil

Roll diameter:

Inside diameter: 3 inches (76.2 mm)

 

Outside diameter: 6.75 inches (171.45 mm)

32

Image 36
Contents Equipment Manual Canadian D.O.C. Warning Table of Contents 9401/9402 Equipment Manual Introduction What action you should take Installing the Printer 9401/9402 Equipment Manual Using the Keys On the KeypadOn the Computer Keyboard Loading Supplies − in one strip see Continuous PrintingSupply Loading Diagram Continuous Printing Backing Paper Take-up Reel Wire Clip Feed Supply On-Demand Printing Tear backing paper here Backing Paper Take-up Reel Slide the supply guide to the top of the supply guide roller Loop the backing paper back through the platen unit as shown Printhead SupplyLever Guide 9401/9402 Equipment Manual Loading the Ribbon Remove the old ribbon by pulling the wire clips as shown Core Ribbon Take-up Reel Cleaning the Printhead and Platen Roller Lightly moisten a cotton swab with rubbing alcohol Replacing the Fuse 9401/9402 Equipment Manual Troubleshooting Problem Corrective ActionProblem Corrective Action Troubleshooting 9401/9402 Equipment Manual Specifications PrinterSupplies Page U.S.A Canada