Monarch 9401, 9402 manual Core

Page 25

5. Loading the Ribbon

9.Guide the ribbon down between the printhead and the front of the printer and around the rollers as shown.

	Delivery	Printhead
	Core	Printhead
	Core
	Take-up
	Core

Ribbon

Take-up

Reel

10.Place the take-up core (empty core) on the ribbon take-up reel.

11.Gently slide the ribbon cores onto the reels while guiding the ribbon around the printhead.

12.Press down firmly on the cores to ensure they are seated on the ribbon reel bases.

21

Image 25

Contents Equipment Manual Canadian D.O.C. Warning Table of Contents 9401/9402 Equipment Manual Introduction What action you should take Installing the Printer 9401/9402 Equipment Manual On the Keypad Using the KeysOn the Computer Keyboard − in one strip see Continuous Printing Loading SuppliesSupply Loading Diagram Continuous Printing Backing Paper Take-up Reel Wire Clip Feed Supply On-Demand Printing Tear backing paper here Backing Paper Take-up Reel Slide the supply guide to the top of the supply guide roller Loop the backing paper back through the platen unit as shown Printhead SupplyLever Guide 9401/9402 Equipment Manual Loading the Ribbon Remove the old ribbon by pulling the wire clips as shown Core Ribbon Take-up Reel Cleaning the Printhead and Platen Roller Lightly moisten a cotton swab with rubbing alcohol Replacing the Fuse 9401/9402 Equipment Manual Problem Corrective Action TroubleshootingProblem Corrective Action Troubleshooting 9401/9402 Equipment Manual Printer SpecificationsSupplies Page U.S.A Canada