Monarch 9402, 9401 manual Loop the backing paper back through the platen unit as shown

Page 20

9401/9402 Equipment Manual

14.Loop the backing paper back through the platen unit as shown.

Platen

Unit

15.Remove the wire clip from the backing paper take-up reel.

Wire

Backing Paper Clip

Take-up Reel

16.Wrap the backing paper around the backing paper take-up reel as shown.

17.Slide the wire clip over the backing paper and backing paper take-up reel.

16

Image 20

Contents Equipment Manual Canadian D.O.C. Warning Table of Contents 9401/9402 Equipment Manual Introduction What action you should take Installing the Printer 9401/9402 Equipment Manual Using the Keys On the KeypadOn the Computer Keyboard Loading Supplies − in one strip see Continuous PrintingSupply Loading Diagram Continuous Printing Backing Paper Take-up Reel Wire Clip Feed Supply On-Demand Printing Tear backing paper here Backing Paper Take-up Reel Slide the supply guide to the top of the supply guide roller Loop the backing paper back through the platen unit as shown Printhead SupplyLever Guide 9401/9402 Equipment Manual Loading the Ribbon Remove the old ribbon by pulling the wire clips as shown Core Ribbon Take-up Reel Cleaning the Printhead and Platen Roller Lightly moisten a cotton swab with rubbing alcohol Replacing the Fuse 9401/9402 Equipment Manual Troubleshooting Problem Corrective ActionProblem Corrective Action Troubleshooting 9401/9402 Equipment Manual Specifications PrinterSupplies Page U.S.A Canada