Terminal Setup
When the installation is complete, reboot the system to initialize the Twin Client software.
a.To reboot the system immediately, click on Finish.
b.To reboot later, click on the option to restart the computer later, and then click on
Finish.
Running the Manager
The PowerNet Twin Client Manager is the utility that manages the terminal software and configurations.
Select Start, Programs, PowerNet, and Twin Client Manager. The PowerNet Twin Client Manager screen appears as shown in the following figure. This is the administrator's main screen, and all functions are accessed from its menu bar, toolbar, and tabs.
Menu Bar
The menu bar provides access to the functions used to configure the terminals and manage their software.
Supported Equipment Manual • May, 2006 |