Error Message Resolution Guide
Message | Reason | Solution | Reference Tech Note |
Error receiving host\nlist from Server; | Bad Protocol detected. | Usually a result of bad cabling, power or | |
|
| faulty transceiver. Also, will receive this if |
|
|
| the Mobile Unit is in the wrong mode for |
|
|
| server operation. |
|
Unexpected Server\ndata received; | Bad Protocol detected. | Usually a result of bad cabling, power or | |
|
| faulty transceiver. Also, will receive this if |
|
|
| the Mobile Unit is in the wrong mode for |
|
|
| server operation. |
|
Error starting\nhost application; | Connected to the server but can | Configure the server handler to access the | |
| not connect to the distant end. | host application. |
|
Select Host or App; | Need to choose your | User selection required. | |
| Host/application destination. |
|
|
Connecting...; | Attempting to connect to the | Advisory message. | |
| Host/application. |
|
|
TCP Error\nReading IP | Mobile Unit missing Network IP | Configure the Mobile Unit with the correct | |
Address\nREBOOT MOBILE UNIT; | information. | network IP information. |
|
Printer start error; | Could not initialize the printer. | Cable or power issue with the printer. | |
Battery too low\nto print; | Not enough power to print. | Replace the battery with a fully recharged | |
|
| battery. |
|
Paper Feed Error\nFix Then Hit Enter; | Paper in the printer is not ready. | Replace the paper or rethread the paper in | |
|
| the printer. |
|
Printer Error\nPrint Ended; | Can not print. | Check cable, battery, communication | |
|
| settings and paper in the printer. |
|
Supported Equipment Manual • May, 2006 |