PSC 315 manual Synchronizing Configuration Files, Synchronizing Program Files

Page 36

Terminal Setup

Synchronizing Configuration Files

Click to put a check in the Synchronize Configuration Files box to enable automatic synchronization of configuration files on the terminal. When the terminal is booted, its configuration files will be compared with the most recent on the PC. The terminal is updated automatically if it does not have the latest revision.

Synchronizing Program Files

Click to put a check in the Synchronize Program Files box to enable automatic synchronization of program files on the terminal. When the terminal is booted, its program files will be compared with the most recent on the PC. The terminal is updated automatically if it does not have the latest revision.

Automatic IP Address Assignment

New terminals will be assigned IP addresses automatically if the following box is checked.

Note: Do not check this option if a DHCP server is configured to manage address assignments.

To set the addresses, click on the Addresses button to access the Segment Address Assignments dialog box, as shown in the following figure.

2-28

Supported Equipment Manual May, 2006

Image 36
Contents Supported Equipment Manual Copyright 1996 2006 by Connect, Inc TrademarksProduction Terminal Setup Chapter Keypad ConfigurationChapter Error Message Resolution Guide IntroductionThis page is intentionally blank Description PictureSetup Requirements AccessoriesBios Version of BiosRelease Notes Patch version a Terminal Setup Downloading from the WEB Running Setup from a Download FileInstallation Installation Running the Manager Menu BarConfiguring the Manager Setting the EmulationQuick Start ToolbarSetting the Servers Setting Terminal Operations Setting Terminal Model Saving the ConfigurationSetting Airloader Auto-Configuration Terminal Setup Downloading Files To Terminal Booting the Terminal Recoverable Error Starting a Telnet SessionStandard Setup Setup Using Twin Client ManagerVT Settings Quadrant Mode Settings Quadrant Mode Key Click Quadrant Mode Terminal Setup Using Twin Client Menus Edit Mobile Unit IPEdit Server/Host IPs Switch Client Modes Edit License KeyRun Site Survey Run Client EmulatorAuthorizing PowerNet Authorized Terminals Adding Licenses Transferring Licenses Listing Airloader Auto-Configuration Software ManagementEnabling Automatic Downloads Synchronizing Configuration Files Synchronizing Program FilesAutomatic IP Address Assignment Creating New Groups Terminal Setup Software Management Setting the Segment Setting Force ReloadSetting the Default Terminal Group Reassigning TerminalsMobile Device Manager MDM Features Select Terminal Messenger from the Tools menu Software Management Terminal Setup Software Management Terminal Setup Software Management Terminal Setup Common Problems with RF Monitor Terminal Setup Manual Download of Configuration Files This page is intentionally blank Keypad Configuration Keypad FiguresFN1 FN2 ESC 5250 Keypad Table VtermAlt PA1 This page is intentionally blank Entry TOO Long Alphabetic onlyMinus not Valid Decimal not ValidUnrecoverable Error Invalid KEYMust Clear Field Scan not AllowedReboot Mobile Unit Mobile UnitWaiting to Send Message Reason Solution Reference Tech Note Message Reason Solution Reference Tech Note Message Reason Solution Reference Tech Note Message Reason Solution Reference Tech Note OUT of Range of Base Connect Serial CableRemove Serial Cable Place in CradleRemove from Cradle Acquiring Cradle BUSMessage Reason Solution Reference Tech Note Name Server Message Reason Solution Reference Tech Note Host Entry Emulation Setup Miscellaneous Setup Login OptionsTest Options OFF Message Reason Solution Reference Tech Note Message Reason Solution Reference Tech Note Message Reason Solution Reference Tech Note Message Reason Solution Reference Tech Note Message Reason Solution Reference Tech Note Message Reason Solution Reference Tech Note Setup Null