PSC 315 manual Quadrant Mode

Page 23

Standard Setup

Quadrant Mode

The scrolling list option defines the rules by which the terminal display is positioned in the larger host display. As defined by Twin Client, quadrants are fixed position “windows” in the host display, and the terminal display is located on whatever quadrant contains the current cursor position.

Off disables quadrant processing and Twin Client simply centers the current host input field in the terminal display.

On enables quadrant processing. However, input fields that cross quadrant boundaries result in a shift to the left in order to locate as much of the current input field on the terminal display.

Soft always positions on a quadrant boundary regardless of input field boundaries. Viewing keys are enabled.

Hard is the same as Soft except the viewing keys are disabled.

Lock locks the terminal display origin (upper left corner) to fixed row and column (x,y) coordinates in the host display. The coordinates are zero-based.

Font

These check boxes enable (checked) or disable (unchecked) the display of characters in double high and double wide font.

Key Click

This check box enables (checked) or disables (unchecked) audible key clicks from the terminal. The default value is on (checked).

Supported Equipment Manual May, 2006

2-15

Image 23
Contents Supported Equipment Manual Production Copyright 1996 2006 by Connect, IncTrademarks Introduction Terminal SetupChapter Keypad Configuration Chapter Error Message Resolution GuideThis page is intentionally blank Picture DescriptionVersion of Bios Setup RequirementsAccessories BiosRelease Notes Patch version a Downloading from the WEB Running Setup from a Download File Terminal SetupInstallation Installation Menu Bar Running the ManagerToolbar Configuring the ManagerSetting the Emulation Quick StartSetting the Servers Setting Terminal Operations Saving the Configuration Setting Terminal ModelSetting Airloader Auto-Configuration Terminal Setup Downloading Files To Terminal Booting the Terminal Starting a Telnet Session Recoverable ErrorVT Settings Standard SetupSetup Using Twin Client Manager Quadrant Mode Settings Quadrant Mode Key Click Quadrant Mode Edit Server/Host IPs Terminal Setup Using Twin Client MenusEdit Mobile Unit IP Run Client Emulator Switch Client ModesEdit License Key Run Site SurveyAuthorizing PowerNet Authorized Terminals Adding Licenses Transferring Licenses Listing Enabling Automatic Downloads Airloader Auto-ConfigurationSoftware Management Automatic IP Address Assignment Synchronizing Configuration FilesSynchronizing Program Files Creating New Groups Terminal Setup Software Management Reassigning Terminals Setting the SegmentSetting Force Reload Setting the Default Terminal GroupMobile Device Manager MDM Features Select Terminal Messenger from the Tools menu Software Management Terminal Setup Software Management Terminal Setup Software Management Terminal Setup Common Problems with RF Monitor Terminal Setup Manual Download of Configuration Files This page is intentionally blank Keypad Figures Keypad ConfigurationFN1 FN2 ESC 5250 Vterm Keypad TableAlt PA1 This page is intentionally blank Decimal not Valid Entry TOO LongAlphabetic only Minus not ValidScan not Allowed Unrecoverable ErrorInvalid KEY Must Clear FieldMobile Unit Reboot Mobile UnitWaiting to Send Message Reason Solution Reference Tech Note Message Reason Solution Reference Tech Note Message Reason Solution Reference Tech Note Message Reason Solution Reference Tech Note Place in Cradle OUT of Range of BaseConnect Serial Cable Remove Serial CableAcquiring Cradle BUS Remove from CradleMessage Reason Solution Reference Tech Note Name Server Message Reason Solution Reference Tech Note Host Entry Emulation Setup Test Options Miscellaneous SetupLogin Options OFF Message Reason Solution Reference Tech Note Message Reason Solution Reference Tech Note Message Reason Solution Reference Tech Note Message Reason Solution Reference Tech Note Message Reason Solution Reference Tech Note Message Reason Solution Reference Tech Note Null Setup