PSC 315 manual OUT of Range of Base, Connect Serial Cable, Remove Serial Cable, Place in Cradle

Page 69

Error Message Resolution Guide

Message

Reason

Solution

Reference Tech Note

Edit License Key;

Menu Option.

Advisory message.

---

Run Site Survey;

Menu Option.

Advisory message.

---

Switch Client Modes;

Menu Option.

Advisory message.

---

Run TwinClient;

Menu Option.

Advisory message.

---

Exit to OS;

Menu Option.

Advisory message.

---

Printer may not be\nplugged in

Can not print.

Check cable, battery, communication

---

or\nturned on!;

 

settings and paper in the printer.

 

OUT OF RANGE OF BASE;

Mobile Unit out of the coverage

Most likely a range, access point, radio,

T1113, T1114, T1161,

 

area.

host or network issue. Troubleshoot the

T1171, T1187 and

 

 

customer’s environment.

T1194

CONNECT SERIAL CABLE;

Serial cable not connected to the

 

Mobile Unit.

REMOVE SERIAL CABLE;

Remove serial cable from to the

 

Mobile Unit.

Check cable, battery and communication

---

settings for the Mobile Unit.

 

Check cable, battery and communication

---

settings for the Mobile Unit.

 

PLACE IN CRADLE;

Place the Mobile Unit in the cradle. Advisory message.

---

Supported Equipment Manual May, 2006

4-9

Image 69
Contents Supported Equipment Manual Copyright 1996 2006 by Connect, Inc TrademarksProduction Chapter Keypad Configuration Terminal SetupChapter Error Message Resolution Guide IntroductionThis page is intentionally blank Picture DescriptionAccessories Setup RequirementsBios Version of BiosRelease Notes Patch version a Downloading from the WEB Running Setup from a Download File Terminal SetupInstallation Installation Menu Bar Running the ManagerSetting the Emulation Configuring the ManagerQuick Start ToolbarSetting the Servers Setting Terminal Operations Saving the Configuration Setting Terminal ModelSetting Airloader Auto-Configuration Terminal Setup Downloading Files To Terminal Booting the Terminal Starting a Telnet Session Recoverable ErrorStandard Setup Setup Using Twin Client ManagerVT Settings Quadrant Mode Settings Quadrant Mode Key Click Quadrant Mode Terminal Setup Using Twin Client Menus Edit Mobile Unit IPEdit Server/Host IPs Edit License Key Switch Client ModesRun Site Survey Run Client EmulatorAuthorizing PowerNet Authorized Terminals Adding Licenses Transferring Licenses Listing Airloader Auto-Configuration Software ManagementEnabling Automatic Downloads Synchronizing Configuration Files Synchronizing Program FilesAutomatic IP Address Assignment Creating New Groups Terminal Setup Software Management Setting Force Reload Setting the SegmentSetting the Default Terminal Group Reassigning TerminalsMobile Device Manager MDM Features Select Terminal Messenger from the Tools menu Software Management Terminal Setup Software Management Terminal Setup Software Management Terminal Setup Common Problems with RF Monitor Terminal Setup Manual Download of Configuration Files This page is intentionally blank Keypad Figures Keypad ConfigurationFN1 FN2 ESC 5250 Vterm Keypad TableAlt PA1 This page is intentionally blank Alphabetic only Entry TOO LongMinus not Valid Decimal not ValidInvalid KEY Unrecoverable ErrorMust Clear Field Scan not AllowedMobile Unit Reboot Mobile UnitWaiting to Send Message Reason Solution Reference Tech Note Message Reason Solution Reference Tech Note Message Reason Solution Reference Tech Note Message Reason Solution Reference Tech Note Connect Serial Cable OUT of Range of BaseRemove Serial Cable Place in CradleAcquiring Cradle BUS Remove from CradleMessage Reason Solution Reference Tech Note Name Server Message Reason Solution Reference Tech Note Host Entry Emulation Setup Miscellaneous Setup Login OptionsTest Options OFF Message Reason Solution Reference Tech Note Message Reason Solution Reference Tech Note Message Reason Solution Reference Tech Note Message Reason Solution Reference Tech Note Message Reason Solution Reference Tech Note Message Reason Solution Reference Tech Note Null Setup