Terminal Setup
Select RF Monitor from the Tools menu.
RF Monitor is an "Over The Air" diagnostic tool. It is used to collect diagnostic trace information from RF terminals running PowerNet Twin Client software.
It runs on a Windows PC and will send a command to the RF terminal to start tracing. The terminal, when it receives this command, will start sending the trace information over the RF link to the PC that issued the command. This will be written to a file on this PC that can be sent to us for analysis.
Click on File to Select Terminal or to Exit.
Choosing Select Terminal allows you to view a log of the terminal’s activity. Enter the Terminal IP Address and Terminal IP Port, and click on OK.
Supported Equipment Manual • May, 2006 |