Quick Start
Click on the + sign in front of Terminal/Group Manager to access the default terminal group. Next, click on the New Group icon and use the Browse button to select the configuration file saved earlier.
Check the Active box, and the system is now configured to automatically download IP addresses, software, and configuration files to the terminals. Click on the 
box in the upper right corner to return to the main menu.
Note: The software does not need to be authorized now. It can be authorized later, after a Telnet session has been established. The procedure is described in Authorizing PowerNet.
Downloading Files To Terminal
Twin Client program and configuration files are installed on the terminal with the following procedure. Boot the terminal according to the instructions in the next section. At the DOS prompt, type “LD” but do not Enter at this time.
Under the Terminal menu, click on the Send Program Files to Terminal menu option.
Supported Equipment Manual • May, 2006 |