Terminal Setup
Setting the Segment
Checking the Segment button restricts a terminal group to a range of IP addresses. The IP Address can be any valid address on the segment, as it is used only to identify the segment. The setting of the Net Mask can be used to restrict the range. This feature is useful for segregating terminal groups by location.
Setting Force Reload
Clicking on the Force Reload button forces all terminals within a group to be automatically updated. The following warning message appears.
Click on the Yes button to force the reload.
Setting the Default Terminal Group
New terminals that have not yet been assigned to any group are initially assigned to the default group in effect when they are booted.
Any group can be made the default group by clicking on the group, and then clicking on the right mouse button. Then click on the Make Default option.
Reassigning Terminals
After a terminal has been configured and assigned to the default group, it can be reassigned to a new group by clicking on the terminal icon as shown below.
Supported Equipment Manual • May, 2006 |