PSC 315 manual Message Reason Solution Reference Tech Note

Page 73

Error Message Resolution Guide

Message

Reason

Solution

Reference Tech Note

Host/App/Network\nclosed the session;

Customer’s environment

Most likely a range, access point, radio,

T1113, T1114, T1161,

 

disconnected the Mobile Unit

host or network issue. Troubleshoot the

T1171, T1187 and

 

session.

customer’s environment.

T1194

Disconnecting...;

Prompt.

Advisory message.

---

Scan Barcode;

Bar code scanning test.

Advisory message.

---

Enter Setup\nPassword;

Prompt.

Advisory message.

---

Enter Profile \nPassword;

Prompt.

Advisory message.

---

Host IP;

Host IP address prompt.

Enter target host IP address.

---

Host Name;

Host name prompt.

Enter target host Name.

---

Port;

Host IP port required.

Enter 23 for Telnet or 1800 for a Connect

T1113, T1114, T1161,

 

 

server. Could also be a different number

T1171, T1187 and

 

 

depending on the customer’s environment. T1194

Mobile Unit Type;

Prompt.

Advisory message.

---

WARNING: This will \nend any\ncurrent Prompt.

Advisory message.

---

session;

 

 

 

Supported Equipment Manual May, 2006

4-13

Image 73
Contents Supported Equipment Manual Trademarks Copyright 1996 2006 by Connect, IncProduction Chapter Keypad Configuration Terminal SetupChapter Error Message Resolution Guide IntroductionThis page is intentionally blank Picture DescriptionAccessories Setup RequirementsBios Version of BiosRelease Notes Patch version a Downloading from the WEB Running Setup from a Download File Terminal SetupInstallation Installation Menu Bar Running the ManagerSetting the Emulation Configuring the ManagerQuick Start ToolbarSetting the Servers Setting Terminal Operations Saving the Configuration Setting Terminal ModelSetting Airloader Auto-Configuration Terminal Setup Downloading Files To Terminal Booting the Terminal Starting a Telnet Session Recoverable ErrorSetup Using Twin Client Manager Standard SetupVT Settings Quadrant Mode Settings Quadrant Mode Key Click Quadrant Mode Edit Mobile Unit IP Terminal Setup Using Twin Client MenusEdit Server/Host IPs Edit License Key Switch Client ModesRun Site Survey Run Client EmulatorAuthorizing PowerNet Authorized Terminals Adding Licenses Transferring Licenses Listing Software Management Airloader Auto-ConfigurationEnabling Automatic Downloads Synchronizing Program Files Synchronizing Configuration FilesAutomatic IP Address Assignment Creating New Groups Terminal Setup Software Management Setting Force Reload Setting the SegmentSetting the Default Terminal Group Reassigning TerminalsMobile Device Manager MDM Features Select Terminal Messenger from the Tools menu Software Management Terminal Setup Software Management Terminal Setup Software Management Terminal Setup Common Problems with RF Monitor Terminal Setup Manual Download of Configuration Files This page is intentionally blank Keypad Figures Keypad ConfigurationFN1 FN2 ESC 5250 Vterm Keypad TableAlt PA1 This page is intentionally blank Alphabetic only Entry TOO LongMinus not Valid Decimal not ValidInvalid KEY Unrecoverable ErrorMust Clear Field Scan not AllowedMobile Unit Reboot Mobile UnitWaiting to Send Message Reason Solution Reference Tech Note Message Reason Solution Reference Tech Note Message Reason Solution Reference Tech Note Message Reason Solution Reference Tech Note Connect Serial Cable OUT of Range of BaseRemove Serial Cable Place in CradleAcquiring Cradle BUS Remove from CradleMessage Reason Solution Reference Tech Note Name Server Message Reason Solution Reference Tech Note Host Entry Emulation Setup Login Options Miscellaneous SetupTest Options OFF Message Reason Solution Reference Tech Note Message Reason Solution Reference Tech Note Message Reason Solution Reference Tech Note Message Reason Solution Reference Tech Note Message Reason Solution Reference Tech Note Message Reason Solution Reference Tech Note Null Setup