The Speaker Company TTP-245C, TTP-244CE, TTP-343C user manual Setup, Setting up the Printer

Page 12

3. Setup

3.1Setting up the Printer

1.Place the printer on a flat, secure surface.

2.Make sure the power switch is off.

3.Connect the printer to the computer with the provided USB cable.

4.Plug the power cord into the AC power cord socket at the rear of the printer, and then plug the power cord into a properly grounded power outlet.

Ethernet RJ-45 interface

USB interface

Centronics interface

Plug

Power

Switch

RS-232C interface

Power Supply

Note:

Please switch OFF printer power switch prior to plug in the power cord to printer power jack.

6

Image 12

Contents TTP-245C / TTP-343C / TTP-244CE Contents Mark Sensor Copyright Declaration Introduction Product IntroductionIii Operations Overview Unpacking and InspectionPrinter Overview V1.0 MicroSD 512 MB Panasonic Transcend, Panasonic Interior view Rear View Setup Setting up the PrinterOpen / Close the Top Cover Loading the Ribbon Please refer to videos on TSC YouTube or driver CD  Loading Path for Ribbon Loading the Media  Loading path for roll labels External Label Roll Mount Installation Option Page Push the peel-off panel back to the printer Page Loading Media in Cutter Mode Option Diagnostic Tool Function Description Setting Ethernet by Diagnostic Utility Later versionsUsing RS-232 interface to setup Ethernet interface Using Ethernet interface to setup Ethernet interface Page Install SD Memory Card V1.0 MicroSD 256 Transcend, Panasonic 512 LED indicator Power on utilitiesLED and Button Functions Regular button functionFunctions 2 Gap/Black Mark Calibration, Self-test and Dump Mode Self-test Gap/black mark sensor intension  Dump mode Parameter Default setting Set Gap Sensor as Media Sensor and Calibrate the Gap SensorSkip AUTO.BAS Troubleshooting LED StatusProblem Possible Cause Recovery Procedure Print QualityMaintenance Printer Part Method IntervalPage Date Content Editor Revise HistoryNo.35, Sec , Ligong 1st Rd., Wujie Township