The Speaker Company TTP-343C, TTP-245C, TTP-244CE user manual Revise History, Date Content Editor

Page 44

Revise History

Date

Content

Editor

2008/8/6

Revise section 3.4.3 (Loading media in peel-off mode)

Camille

 

 

 

2008/11/17

Revise section 3.4.2 (External label roll mount installation/Option)

Camille

 

 

 

2009/2/4

Revise section 3.4.4 (Loading media in cutter mode/Option)

Camille

 

 

 

2009/3/11

Revise sections 2.2.1 & 3.6 (Recommended SD card specification)

Camille

 

 

 

2009/6/19

Revise section 1.2

Camille

 

 

 

2009/10/13

*Revise section 3.5

Camille

*Add section 3.6

 

 

2010/9/1

Revise section 3.4.3 (Loading media in peel-off mode)

Camille

 

 

 

2010/11/23

Revise section 1.2 and 3.1

Camille

 

 

 

2011/1/25

Modify TSC address

Camille

 

 

 

2013/4/2

Modify section 3.4.4 (cutter spec)

Camille

Modify section 4.3.2 (V7.0 F/W self test)

 

 

 

Add TSC YouTube web address

 

38

Image 44
Contents TTP-245C / TTP-343C / TTP-244CE Contents Mark Sensor Copyright Declaration Introduction Product IntroductionIii Operations Overview Unpacking and InspectionPrinter Overview V1.0 MicroSD 512 MB Panasonic Transcend, Panasonic Interior view Rear View Setup Setting up the PrinterOpen / Close the Top Cover Loading the Ribbon Please refer to videos on TSC YouTube or driver CD  Loading Path for Ribbon Loading the Media  Loading path for roll labels External Label Roll Mount Installation Option Page Push the peel-off panel back to the printer Page Loading Media in Cutter Mode Option Diagnostic Tool Function Description Setting Ethernet by Diagnostic Utility Later versionsUsing RS-232 interface to setup Ethernet interface Using Ethernet interface to setup Ethernet interface Page Install SD Memory Card V1.0 MicroSD 256 Transcend, Panasonic 512 LED indicator Power on utilitiesLED and Button Functions Regular button functionFunctions 2 Gap/Black Mark Calibration, Self-test and Dump Mode Self-test Gap/black mark sensor intension  Dump mode Parameter Default setting Set Gap Sensor as Media Sensor and Calibrate the Gap SensorSkip AUTO.BAS Troubleshooting LED StatusProblem Possible Cause Recovery Procedure Print QualityMaintenance Printer Part Method IntervalPage Date Content Editor Revise HistoryNo.35, Sec , Ligong 1st Rd., Wujie Township