| Contents |
|
Copyright Declaration | i | |
1. Introduction | ii | |
1.1 | Product Introduction | ii |
1.2 | Compliances | ii |
2. Operations Overview | 1 | |
2.1 | Unpacking and Inspection | 1 |
2.2 | Printer Overview | 2 |
| 2.2.1 Front View | 2 |
| 2.2.2 Interior view | 4 |
| 2.2.3 Rear View | 5 |
3. Setup | 6 | |
3.1 | Setting Up the Printer | 6 |
3.2 | Open / Close the Top Cover | 7 |
3.3 | Loading the Ribbon | 8 |
3.4 | Loading the Media | 11 |
| 3.4.1 Loading the media | 11 |
| 3.4.2 External Label Roll Mount Installation (Option) | 13 |
| 3.4.3 Loading Media in | 15 |
| 3.4.4 Loading Media in Cutter Mode (Option) | 17 |
3.5 | Diagnostic Tool | 18 |
| 3.5.1 Start the Diagnostic Tool | 18 |
| 3.5.2 Printer Function (Calibrate sensor, Ethernet setup, RTC |
|
| setup………) | 19 |
3.6 | Setting Ethernet by Diagnostic Utility | 20 |
| 3.6.1 Using USB interface to setup Ethernet interface | 20 |
| 3.6.2 Using | 21 |
| 3.6.3 Using Ethernet interface to setup Ethernet interface | 22 |
3.7 | Install SD Memory Card | 24 |
4. LED and Button Functions | 26 | |
4.1 | LED indicator | 26 |
4.2 | Regular button function | 26 |
4.3 | Power on utilities | 26 |
| 4.3.1 Ribbon and Gap/Black Mark Sensor Calibration | 27 |
| 4.3.2 Gap/Black Mark Calibration, | 28 |
| 4.3.3 Printer Initialization | 31 |
| i |
|