3.5.2Printer Function (Calibrate sensor, Ethernet setup, RTC setup………)
1.Select the PC interface connected with bar code printer.
2.Click the “Function” button to setting.
3.The detail functions in the Printer Function Group are listed as below.
| Function | Description |
|
|
|
| Calibrate Sensor | Calibrate the sensor specified in the Printer Setup |
| group media sensor field | |
|
| |
|
| Setup the IP address, subnet mask, gateway for |
| Ethernet Setup | the on board Ethernet (Please refer to next |
|
| section) |
| RTC Time | Synchronize printer Real Time Clock with PC |
|
|
|
| Print Test Page | Print a test page |
|
|
|
| Reset Printer | Reboot printer |
|
|
|
| Factory Default | Initialize the printer and restore the settings to |
| factory default. | |
|
| |
| Dump Text | To activate the printer dump mode. |
|
|
|
| Ignore AUTO.BAS | Ignore the downloaded AUTO.BAS program |
|
|
|
| Configuration Page | Print printer configuration |
|
|
|
Note:
For more information about Diagnostic Tool, please refer to the diagnostic utility quick start
guide in the CD disk \ Utilities directory.
19