The Speaker Company TTP-245C, TTP-244CE Please refer to videos on TSC YouTube or driver CD

Page 15

5. Stick the ribbon onto the ribbon rewind paper core.

6.Turn the ribbon rewind gear until the ribbon plastic leader is thoroughly wound and the black section of the ribbon covers the print head. Close the ribbon access cover and the top cover.

Note:

Please refer to videos on TSC YouTube or driver CD.

Image 15

Contents TTP-245C / TTP-343C / TTP-244CE Contents Mark Sensor Copyright Declaration Product Introduction IntroductionIii Unpacking and Inspection Operations OverviewPrinter Overview V1.0 MicroSD 512 MB Panasonic Transcend, Panasonic Interior view Rear View Setting up the Printer SetupOpen / Close the Top Cover Loading the Ribbon Please refer to videos on TSC YouTube or driver CD  Loading Path for Ribbon Loading the Media  Loading path for roll labels External Label Roll Mount Installation Option Page Push the peel-off panel back to the printer Page Loading Media in Cutter Mode Option Diagnostic Tool Function Description Later versions Setting Ethernet by Diagnostic UtilityUsing RS-232 interface to setup Ethernet interface Using Ethernet interface to setup Ethernet interface Page Install SD Memory Card V1.0 MicroSD 256 Transcend, Panasonic 512 Regular button function LED indicatorPower on utilities LED and Button FunctionsFunctions 2 Gap/Black Mark Calibration, Self-test and Dump Mode Self-test Gap/black mark sensor intension  Dump mode Set Gap Sensor as Media Sensor and Calibrate the Gap Sensor Parameter Default settingSkip AUTO.BAS LED Status TroubleshootingPrint Quality Problem Possible Cause Recovery ProcedurePrinter Part Method Interval MaintenancePage Revise History Date Content EditorNo.35, Sec , Ligong 1st Rd., Wujie Township