The Speaker Company TTP-244CE, TTP-245C, TTP-343C user manual Open / Close the Top Cover

Page 13

3.2Open / Close the Top Cover

1.Open the printer top cover by pulling the tabs located on each side towards the front of the printer, then lift the top cover to the maximum open angle.

2.A top cover support at the rear of the printer will engage with lower inner cover to hold the printer top cover open.

3.Hold the top cover and press the top cover support to disengage the top cover support with lower inner cover. Gently close the top cover.

7

Image 13

Contents TTP-245C / TTP-343C / TTP-244CE Contents Mark Sensor Copyright Declaration Product Introduction IntroductionIii Unpacking and Inspection Operations OverviewPrinter Overview V1.0 MicroSD 512 MB Panasonic Transcend, Panasonic Interior view Rear View Setting up the Printer SetupOpen / Close the Top Cover Loading the Ribbon Please refer to videos on TSC YouTube or driver CD  Loading Path for Ribbon Loading the Media  Loading path for roll labels External Label Roll Mount Installation Option Page Push the peel-off panel back to the printer Page Loading Media in Cutter Mode Option Diagnostic Tool Function Description Later versions Setting Ethernet by Diagnostic UtilityUsing RS-232 interface to setup Ethernet interface Using Ethernet interface to setup Ethernet interface Page Install SD Memory Card V1.0 MicroSD 256 Transcend, Panasonic 512 Power on utilities LED indicatorLED and Button Functions Regular button functionFunctions 2 Gap/Black Mark Calibration, Self-test and Dump Mode Self-test Gap/black mark sensor intension  Dump mode Set Gap Sensor as Media Sensor and Calibrate the Gap Sensor Parameter Default settingSkip AUTO.BAS LED Status TroubleshootingPrint Quality Problem Possible Cause Recovery ProcedurePrinter Part Method Interval MaintenancePage Revise History Date Content EditorNo.35, Sec , Ligong 1st Rd., Wujie Township