The Speaker Company TTP-244CE, TTP-245C, TTP-343C user manual

Page 43

Please use 100% Ethenol. DO NOT use medical alcohol, which may damage the printer head.

Regularly clean the print head and supply sensors once change a new ribbon to keep printer performance and extend printer life.

Continuous printing will cause printer motor overheat. Printer will stop printing automatically about 10~15 minutes until motor is cooling down. Please don’t turn off power when printer pauses or the data transferred to printer buffer will be lost.

The maximum printing ratio per dot line is 15% for this printer. To print the full web black line, the maximum black line height is limited to 40 dots, which is 5mm for 203 DPI resolution printer and 3.3mm for 300 DPI resolution printer.

37

Image 43
Contents TTP-245C / TTP-343C / TTP-244CE Contents Mark Sensor Copyright Declaration Product Introduction IntroductionIii Unpacking and Inspection Operations OverviewPrinter Overview V1.0 MicroSD 512 MB Panasonic Transcend, Panasonic Interior view Rear View Setting up the Printer SetupOpen / Close the Top Cover Loading the Ribbon Please refer to videos on TSC YouTube or driver CD  Loading Path for Ribbon Loading the Media  Loading path for roll labels External Label Roll Mount Installation Option Page Push the peel-off panel back to the printer Page Loading Media in Cutter Mode Option Diagnostic Tool Function Description Later versions Setting Ethernet by Diagnostic UtilityUsing RS-232 interface to setup Ethernet interface Using Ethernet interface to setup Ethernet interface Page Install SD Memory Card V1.0 MicroSD 256 Transcend, Panasonic 512 Regular button function LED indicatorPower on utilities LED and Button FunctionsFunctions 2 Gap/Black Mark Calibration, Self-test and Dump Mode Self-test Gap/black mark sensor intension  Dump mode Set Gap Sensor as Media Sensor and Calibrate the Gap Sensor Parameter Default settingSkip AUTO.BAS LED Status TroubleshootingPrint Quality Problem Possible Cause Recovery ProcedurePrinter Part Method Interval MaintenancePage Revise History Date Content EditorNo.35, Sec , Ligong 1st Rd., Wujie Township