Note: Checking or unchecking TCs on the Thermocouples Tab will affect the TCs plotted on the Chart Tab.
The next tab is the Furnace tab (figure 2.14a and 2.14b), which contains the furnace ID, the make and model of the furnace, the furnace type, the furnace use, the furnace’s operating range, the furnace dimensions, the furnace class (newer versions only), and an optional image of the furnace.
Figure 2.14a Report Properties Furnace Tab (Version 1.101.0.76 & below)
Figure 2.14b Report Properties Furnace Tab (Version 1.101.0.80 & above)
Super Systems Inc. | Page 46 | SDS Data Logger Manual #4565 Rev D |