Figure 3.9 Setpoint Not Numeric error message
Once a template has been added, the first template will be loaded into the fields.
Save Changes to Template Button
This option will save the changes made to a specific template back to the template collection stored in memory. A valid template must be selected from the “Templates” list to the right of the “Template Information” tab (figure 3.10). Note: this will only save changes to 1 template at a time and it will not save changes to the template file. Use the Save buttons or menu options to save the file. Once the template has been saved, the first template will be loaded into the fields.
Figure 3.10 Templates drop-down list
If a valid template is not chosen, the SDS software will display a No Template Selected error message (figure 3.11).
Figure 3.11 No Template Selected error message
Super Systems Inc. | Page 81 | SDS Data Logger Manual #4565 Rev D |