SSI America 8020, 8040 manual System Setup, Firmware Version 1.09 and below

Page 35

equipment normally operates at 1700 °F, then perform the cold junction calibration using a 1700 °F signal.

Firmware Version 1.09 and below

The user can source temperature to any one of the inputs, since the cold junction value is separate from the input trim values, even though there is only one thermister per board. If the temperature being sourced does not match the temperature displayed on the screen, the user will need to adjust the cold junction value (“Modify brd CJ by (+/-) line) to match. After the cold junction value has been modified, the user will be able to modify any of the input trims, if necessary.

Firmware Version 1.10 and above

Input Board Version 1.07 and below

The user will want to source the temperature to input three, since input boards with a version of 1.07 or earlier only have one thermister, so the cold junction calibration will apply to the whole board. If the temperature being sourced does not match the temperature displayed on the screen, then the user will need to adjust the cold junction trim value to match. After the cold junction value has been modified, the user will be able to adjust the trim values for inputs one, two, four, and five, if necessary.

Input Board Version 1.08 and above

The user will have to source the temperature to all five inputs, since input boards with a version of 1.08 or later have five thermisters per board, one for each input, so the cold junction calibration will have to be made to each input separately. If the temperature being sourced does not match the temperature displayed on the screen, then the user will need to adjust the input trim value to match.

24. System Setup

This screen displays any system setup information. Currently, the only information available is the Survey Deviation Alarm Smart and the Temperature Resolution. To turn the Survey deviation Alarm Smart on, enter a 1 and press Enter. To turn the Survey Deviation Alarm Smart off, enter a 0 and press Enter. The Temperature resolution field accepts a 0, 1, or 2 as a value. The temperature resolution affects the resolution of the temperatures displayed on the data logger.

Super Systems Inc.

Page 35

SDS Data Logger Manual #4565 Rev D

Image 35

Contents SDS Data Logger Product Overview5 Table of ContentsSDS Software Appendix a Standard Calibration Range Revision History98 Product Description Product SpecificationsCalibration Software InstallationGetting Started Thermocouple connectionsVoltage connections 20 mA. Current Loop connectionsSurvey Templates Page Installing the SDS Software InstallationRepair/Remove SDS Reporter screen Connecting The SDS Data Logger To a NetworkIP Address Subnet Mask Default Gateway Menu List SDS 8020/8040 Data LoggerConfiguration Level Level 2 Pass Code Required Page Keypad Assignments Display Survey Information Overview DisplayDisplay Input Settings Display Logged Data Display Input OffsetsSelect Input Channels HelpNNM Modify Input SettingsSelect Survey Template Modify Input OffsetsBattery Status Revision Display About/Sign-OnLanguage/Lengua Set Display ValuesOverview Display Selected Quick ChartModify Survey Information Quick Chart SetupSet the Date and Time Input Calibration Port SetupTC Type mV Range Chart Cold Junction Trim Firmware revision 1.09 or below Firmware Revision 1.10 and above To Perform a Cold Junction Calibration Firmware Revision 1.11 and aboveInput Board Version 1.08 and above System SetupFirmware Version 1.09 and below Set IP Address Set Pass CodesClear Logged Data Survey Deviation Alarm LogPage File Menu Options File Æ New / New ButtonSDS Reporter Report Properties Tab File Æ Open / Open ButtonPage Manually Creating a Survey Record Page 10 Report Properties Thermocouples Tab Page 14a Report Properties Furnace Tab Version 1.101.0.76 & below Page Page Page Page Page File Æ Print File Æ Save / File Æ Save As / Save ButtonFile Æ Export Page SDS Æ Manage Survey Templates Print ButtonFile Æ Print Preview File Æ ExitSDS Æ Download Surveys and Data Page Page SDS Æ Launch Direct FTP 36a FTP session window with Internet Explorer Ftp//LANGSSI772@IP Address FTP Login For Access to the a DriveSDS Æ View Real-time Data Page SDS Æ Manage Survey Records 43 Confirm delete of local records 45 Changes Saved message box SDS Æ Perform Comms TestPage Options Menu Options Options Æ Multiple SDS ModeOptions Æ Show Labels On Chart Help Æ Check for UpdatesHelp Æ About 54 No updates message boxSDS Data Tags 55 SDSReporter About boxTag Description Usage TC Survey SummarySdssp Tag Sample Output Sample Output TagMin/Max/Mean/Spread/Deviation Tag Description Usage TC Offsets Description Usage TagCreating a Personalized Template Page Page New Button / File Î New SDS Template ManagerOpen Button / File Î Open File Î Save As Save Buttons / File Î SaveAdd New Template Button Exit Button / File Î ExitSave Changes to Template Button Delete Template Button Template Information Tab Description of Template Manager Screen TabsSurvey Information Tab Active TCs Tab Controller Information Tab 18 New SDS Template Manager SDS Reporter Versions 1.101.0.76 and aboveSave Buttons / File Î Save Arrow Buttons Add Template ButtonDelete Button Copy ButtonTemplate Information Tab Survey Information Tab Active TCs Tab Controller Information Tab Description of Template Manager Screen Fields Version 1.101.0.71 & Below General Notes Thermocouple Type Range in F Appendix a Standard Calibration RangeRevision History