4 Printer Operation
4.3.1.9Stiffness Menu
Set the media sticking force (media stiffness) to the media guide.
Setup items Stiffness
Parameters | Description |
Soft | Setting for soft media where media feeding errors |
| and media jams occur. |
Normal | Setting for normal media. |
- | After setting, shift to the previous hierarchy menu. |
4.3.1.10Thickness Menu
Set the media thickness.
Setup items Thickness
Parameters 50µm-<100µm>1500µm
Description
Change media thickness by operating the following keys.
•[F2] key: to increase the setup value.
•[F4] key: to decrease the setup value.
•[ENTER] key: to confirm the setup value
•[CANCEL] key: to cancel the setup value
Notes
Bidirectional quality can only be obtained when media thickness is set correctly
4.3.1.11Heater (A) Menu
Set the temperature of the Heater.
Setup items Heater (A)
Parameters
OFF – 50°C
Description
Change heater temperature by operating the following keys.
•[F2] key: to increase the setup value.
•[F4] key: to decrease the setup value.
•[ENTER] key: to confirm the setup value
•[CANCEL] key: to cancel the setup value
8265/8290/8365/8390 User Guide | 47 |