6 Maintenance
Caution
Be sure not to pinch your fingers while opening and closing the front cover.
Step 2 : Refer to "TestPrinting" to perform nozzle check printing.
Step 3 : Check if the print head, referring to the diagram below.
Step 4 :
Step 5 :
Step 6 :
Key
F2
Check the printer is in the normal status.
Press the [F2] key on the operation panel.
I)The printer enters the cleaning menu.
Press the [F2] key on the operation panel to change the parameters.
Parameter | Description |
Small | Small cleaning is performed. |
Normal | Normal cleaning is performed. |
Strong | Strong cleaning is performed. |
Step 7 : Press the [ENTER] key on the operation panel to start the head cleaning.
Notes
If the [Cancel] key has been pressed instead of the [ENTER] key after changing the parameters, the printer returns to the normal status without performing a head cleaning.
8265/8290/8365/8390 User Guide | 129 |