Xerox 8290, 8265, 8390, 8365 Control Panel During Printing, Heaters are not Ready during Printing

4 Printer Operation

4.5 CONTROL PANEL DURING PRINTING

When sending a file to your printer, following messages can be displayed.

4.5.1Heaters are not Ready during Printing

When the heaters are not reached their target temperature, the following screen will be displayed.

Wait Heating

Dist.Adj. Cleaning

A:HB: HC: HD:H Heater Warming up

Still, it is possible to start the print. However, the heater will continue to warm up in order to reach the requested temperature.

Step 1 : Press the F3 key to ENTER the HeaterStatus menu.

Wait Heating

Dist.Adj. Cleaning

A:HB: HC: HD:H Heater Warming up

Step 2 : Go to submenu 2/2 and press the F2 key to start the print.

4.5.2Heaters are Ready during Printing

When heaters are ready, the printer will start printing.

While printing, some actions can be taken.

1) On the fly step adjustments.

In case of overlapped printing images or white lines on printing image, the step should be adjusted.

(+)Increase in case of overlap

(-)Decrease in case of white lines between swats

88 8265/8290/8365/8390 User Guide