6 MAINTENANCE
6.1 INTRODUCTION
This chapter explains the necessary daily, weekly and monthly maintenance of the printer. Be sure to perform the recommended maintenance strictly. If not, Xerox does not guarantee constant printing quality.
6.2 8265/8290 PERIODIC MAINTENANCE
This section describes the periodic maintenance required for this machine. This maintenance helps ensure stable image quality. In the periodic maintenance, some service parts may be checked, cleaned, or replaced. Perform periodical inspections according to the table below.
| Maintenance cycles |
|
No° | Action | Frequency |
1 | Cleaning the edges of the caps and the area around the caps | Weekly |
2 | Cleaning around the bottom of the heads | Weekly |
3 | Cleaning the wipers | |
4 | Replacing the wipers | Monthly |
5 | Replacing the sponge in the spitting box | Monthly |
6 | Change the upper sponge at the back of the capping station |
Notes 
•All cleaning in “Ink areas” must be done with Xerox 8265/8290 cleaning solution.
•Above maintenance cycle is based on use:
8 hours / day, 5 days / week and 44 weeks / year.
If machine is used more, maintenance periods will come earlier.
Available kits for the end user and their order numbers
1.User and good shape kit for 6 months
No | Description | Quantity |
1 | Sponge plate | 6 |
2 | Wipers | 24 |
3 | Spitting box sponge | 12 |
4 | Cleaning Liquid 250 ml | 3 |
5 | Instruction sheet | 1 |
6 | Good shape kit | 1 |
2.Good shape kit
No | Description | Quantity |
1 | Gloves | 300 |
2 | Pipette | 12 |
3 | Swabs | 150 |
4 | Polyknit wiper | 300 |
3.Long store kit
8265/8290/8365/8390 User Guide | 105 |
