4 Printer Operation
4.3.4.9CapCycle Menu
Perform a TubingFlush every 1 to 24 hours.
Notes A TubingFlush is automatically performed after 10 minutes of idle and before shut down of the printer.
Setup items | Parameters | Description |
CapCycle | OFF | No tubing flush will be performed |
| 1 – 6 - 24 hours | Every 1 – 24 hours (adjustable) a TubingFlush is performed. |
| - | • [CANCEL] key: To shift to the previous hierarchy menu. |
4.3.4.10SlantCh. Menu
To enable or disable whether the printer performs a slant check after every print of at least 1 meter.
Setup items | Parameters | Description |
SlantCh. | Off | No SlantCheck |
| On | Perform SlantCheck |
| - | • [CANCEL] key: To shift to the previous hierarchy menu. |
4.3.4.11RemPanel Menu
Enables or disables using Remote Panel software.
*RemPanel* |
|
Off | On |
(1/1) |
Setup items | Parameters | Description |
RemPanel. | Off | Remote panel usage is disabled. |
| On | Remote panel usage is enabled. |
| - | • [CANCEL] key: To shift to the previous hierarchy menu. |
8265/8290/8365/8390 User Guide | 71 |