6 Maintenance
6.2.4Semi-Annual Maintenance
6.2.4.1Change upper sponge at back of the capping station.
Step 1 : Power ON the printer.
Step 2 : Go to the H.Unlock Menu and press F2.
Step 3 : Open the Front Cover.
Step 4 : Slide the carriage to the left to access the upper sponge.
Step 5 : Remove the two screws fixing the sponge (1).
1 = Screws fixing the sponge (1)
Step 6 : Replace the sponge and tighten it again to the plate with the two screws.
1 = Capping sponge
2 = Plate
Step 7 : Close the Front Cover.
Step 8 : Press the [ENTER] key to exit the H.Unlock Menu. The carriage will cap in and be locked.
8265/8290/8365/8390 User Guide | 111 |
