Xerox 8290, 8265, 8390, 8365 manual Setting Media Type, Setup items, Parameters, Description

3 Printer Setup

Notes

With a small intervention it is possible to reverse your winding direction. Mount the twist cable between the control box and the front motorized unit cable.

Notes

You can use the roll-off foot switch during loading of roll media.

3.4.3Setting Media Type

The procedure for setting media type is explained below.

Step 1 : Turn the printer on and load the media.

¾Once the media has been set, the media initial menu will be displayed.

Step 2 : Press one of the following keys on the operation panel, and select the current media type.

¾When alternating roll/sheet media selection: [F2]

¾When changing from media loading: [F3]

¾When changing media type: [F4]

Setup items	Key	Parameters	Description
Media type	F2	Roll media	Alternates the roll media type.
		Sheet media	• Roll media: Set when loading roll media.
			• Sheet media: Set when loading sheet media.
Lever Down/Up	F3	Lever up	Switches between up and down motion of the pressurizing
		Lever down	lever.
			Use this when starting over from the media setup.
Media Type	F4	User 1	Set media type for printing.
		User 2	For setup values of printing operation, eight settings of "user
		User 3	1-8" can be set.
		User 4	Refer to ‘Menu Overview’
		User 5
		User 6

User 7

User 8

28 8265/8290/8365/8390 User Guide