4 Printer Operation
Notes 
The Network Settings menu is displayed if the network interface board has been installed on the product. The items on the File Management menu are displayed if a hard disk has been installed in the product.
Setup items
SetupMenu (1/7)
SetupMenu (2/7)
SetupMenu (3/7)
SetupMenu (4/7)
SetupMenu (5/7)
SetupMenu (6/7)
SetupMenu (7/7)
SetupMenu
Parameters
InkStatus
OriginSet
TestPrint
MediaSet
Print mode setting
Command setting
Layout setting
Function setting
Roll setting
Centronics setting
Network setting
Utility setting
File management setting
Initialize setting
Data dump
Ink Manager
Head Unlock
Wiper clean
Tank change
Tubing Flush
Version Check
-
Description
Displays the information (ink status) for each ink cassette installed in the ink cassette slot.
Sets the printing start position (origin) for printing data.
Performs test printing.
Makes various media settings.
Makes various print mode settings.
Makes various printer command settings.
Makes various layout function settings.
Makes various processing printing data settings.
Makes various roll media settings.
Sets Centronics Interface communication mode.
Makes the settings for the network interface.
Makes various advanced function settings.
Makes various settings for the processing method of the printing data sent from computer to the installed hard disk in the printer.
Returns the parameters to factory default value.
For Authorized Xerox Service Technicians only
Manages the ink configuration, smart chip management system and other ink related settings.
The cutting blade is replaced.
Clean the wiper.
Tank is replaced.
Makes various tubing flush settings
Ability to view the installed firmware version.
[CANCEL] key: Cancel the setup menu, and shift to the normal condition.
Notes 
By using the software server RIP (option), some setups for printing can be set by the RIP. For details, refer to the operation manual of the products.
40 | 8265/8290/8365/8390 User Guide |
