4 Printer Operation
4.3.1.7InkDryTime Menu
Set the waiting period between the end of operation and the start of next printing in order to let the printed media dry.
Setup items InkDryTime
Parameters
0 to <30 sec. > to 270 sec. to 60 min.
Description
To change the InkDryTime by operating the following keys.
•[F2] key: to increase the setup value.
•[F4] key: to decrease the setup value.
•[ENTER] key: to confirm the setup value
•[CANCEL] key: to cancel the setup value
4.3.1.8H. Height Menu
Set the distance (head height) between the print head and the media. Head height can be changed to three levels according to media thickness.
Setup items HeadHeight
Parameters | Description |
low | When using media with a thickness of 80µm to 300µm |
middle | When using media with a thickness of 300µm to 700µm |
Hhgh | When using media with a thickness of 700µm to 1000µm |
- | (1 µm = 0,001 mm) |
Notes 
Set the height of the head in relation to the thickness of the media.
•If the setting is set to "High" and the print is created on thin media, good quality print results will not be achieved.
•If the setting is set to "Low" and thick media is used, the media and print head will come into contact and may result in damage to the product.
46 | 8265/8290/8365/8390 User Guide |
