Xerox manual Adjustments, 8265/8290/8365/8390 User Guide

7 Adjustments

At the Control Panel, press either the F2 key or F4 key to select the number determined in the previous step.

Using the previous steps example, you would press either F2 or F4 to until the display read “4”.

Step 4 : Press the [Enter] key on the control panel to set the Uni-D Alignment value for “Head 2".

Step 5 : Repeat steps 3 through 5 to set the Uni-D Alignment for Print Heads 3 and 4.

Step 6 : Repeat step 2 and analyze the Uni-D Test Print. again. Verify that the Uni-D Alignment is successful. The test print should look similar to the test print example in Step 3.

If necessary, repeat the Uni-D Adjustment until the Uni-D Test Print looks similar to the test print example in Step 3.

134 8265/8290/8365/8390 User Guide