Manuals / Xerox / Computer Equipment / Printer

Xerox 8265, 8290, 8390, 8365 Drier D Menu, Setup items Drier, Parameters, Description, HStatus Menu

Models: 8365 8390 8265 8290

1 152

Download 152 pages 53.66 Kb

Page 57

Image 57

4 Printer Operation

4.3.1.14Drier (D) Menu

Set the temperature of the Drier.

Setup items Drier

Parameters

OFF – 50°C

Description

Change drier temperature by operating the following keys.

•[F2] key: to increase the setup value.

•[F4] key: to decrease the setup value.

•[ENTER] key: to confirm the setup value

•[CANCEL] key: to cancel the setup value

Notes

•The default setting for the drier is set to ‘50°C’.

•The function of the drier (D): Heating the printed transfer paper evaporates the water fast enough so that the print is touch-dry when wound.

4.3.1.15HStatus Menu

Check the temperature of the heating elements.

Notes

A stands for the Heater.

B stands for the Fixer.

C stands for the Post Fixer.

D stands for the Dryer.

Press the [CANCEL] key to go to the previous menu.

8265/8290/8365/8390 User Guide

Page 57

Image 57

Xerox 8265, 8290, 8390, 8365 manual Drier D Menu, Setup items Drier, Parameters, Description, HStatus Menu

Contents

User Guide 8265/8290/8365/8390 Wide Format Color Printer701P48331 Page WEEE regulations Environmental informationDisposal of your old product This page has been intentionally left blank 1 Safety Instructions TABLE OF CONTENTS3 Printer Setup 2 Printer OverviewMaintenance TroubleshootingAppendix Adjustments8265/8290/8365/8390 User Guide This page has been intentionally left blank1.3 IMPORTANT SAFETY INSTRUCTIONS 1 SAFETY INSTRUCTIONS1.1 INTRODUCTION 1.2 WARNINGS, CAUTIONS AND NOTESGeneral information Do not touch the connector 1 Safety InstructionsOnly use Xeror Ink and appropriate cleaning liquid Move the razor blade slowly along the media cutting groove1.4 WARNING LABELS 1.4.1 Handling the Warning Labels1.4.2 Locations and Types of Warning Labels 1 Safety Instructions No Type8265/8290/8365/8390 User Guide 8265/8290/8365/8390 User Guide 1 Safety InstructionsSHOCK, DISCONNECT ALL POWER SUPPLY CORDS BEFORE SERVICING THIS UNIT HAS TWO POWER SUPPLY CORDS, WHEN WINDINGUNIT IS PROVIDED. TO REDUCE THE RISK OF ELECTRICAL No Type1 Safety Instructions This page has been intentionally left blank8265/8290/8365/8390 User Guide 2 PRINTER OVERVIEW 2.1 FEATURES1 High speed output 2 Wide variety of compatible media2.2.1 Front of Printer 2.2 PART NAMES AND FUNCTIONSNo Name FunctionNo Connection 2.2.2 Rear of PrinterTemperature 2.2.3 Position and Function of the Heating ElementsHeater element FunctionSetup menu display 2.2.4 Printer Control Panel2.2.4.1 Operation keys NameName 2.2.4.2 LCD Monitor and Light IndicatorsColour Status2.2.6 Unwinder Rear 2.2.5 Winder FrontName Function2.2.7 Winder/Un-winder Control Panel NameFunction Foot switch label 2.2.8 Winder/Un-winder Operation LabelsFront tensioning label PCB box label2 Printer Overview This page has been intentionally left blank8265/8290/8365/8390 User Guide 3.1 TURNING THE PRINTER POWER ON/OFF 3 PRINTER SETUP3.1.1 Turning the Power ON 3.1.2 Turning the Power OFFStep 4 The product will perform the power OFF operation 3 Printer Setup¾ Following message is displayed on the operation panel ¾ All lamps and the LCD of the operation panel will turn OFF3.2 TURNING THE WINDER/UN-WINDER POWER ON / OFF o Do not touch the connector 3.3 CONNECTING THE NETWORK INTERFACE3.4.1 Loading Sheet Media 3.4 MEDIA HANDLINGMaximum Media Width 2280 mmPage 3.4.2.1 Installing the media roll 3.4.2 Loading Roll Media3.4.2.2 Loading the media into the printer Printable side on the inside of the roll Printable side on the outside of the rollSetup items 3.4.3 Setting Media TypeParameters Description3.5 TEST PRINTING Key name Setup itemsParameters Descriptions3 Printer Setup 3.5.1 Setup ListUse this function to check the current status of the printer 8265/8290/8365/8390 User Guide3.5.2 Nozzle Check 3 Printer Setup 3.5.3 Colour PaletteWe recommend printing the palette in 8265/8290/8365/8390 User Guide3 Printer Setup 3.5.4 Maintenance RecordUse this function to check the life cycles of the printer parts 8265/8290/8365/8390 User Guide4 PRINTER OPERATION 4.1.2 Setting Menu Display4.1 PRINTER STATUS 4.1.1 Normal4.1.3 Changing the Printer Status 4.1.3.1 Changing the status from normal to the setting menu display4.1.3.2 Changing the status from the setting menu display to normal 4.2 USING MEDIA 4.2.1 Media Type4.2.2 Cautions on Handling Media 4.2.3 Precaution on Storing Media 4.2.4 Media Printing Area1 Roll media 2 Sheet media SetupMenu* VersionCheck Area 7/7 4.3 MENU OVERVIEWSetup items ParametersDescription Setup items 4.3.1 Setup Menu 1/7Symbols Parameter 1 Parameter 2 Parameter Refer to Setup menu4.3.1.2 OriginSet Menu Setup items OriginSetParameters DescriptionSetup items Setup items4.3.1.3 TestPrint menu Parameters4.3.1.5 Media Menu Setup itemsParameters Description4.3.1.6 User Menu Setup itemsParameters DescriptionSetup items HeadHeight Setup items InkDryTime4.3.1.7 InkDryTime Menu ParametersSetup items Thickness Setup items StiffnessSetup items Heater A 4.3.1.9 Stiffness MenuSetup items Post Fixer C Setup items Fixer B4.3.1.12 Fixer B Menu Parameters4.3.1.14 Drier D Menu Setup items DrierParameters DescriptionSetup items Change Setup items Dist.Adj4.3.1.16 Dist. Adj Menu ParametersSetup items Setup items Dist.Adj4.3.1.18 Dist.Adj Menu ParametersSetup items Media cutting Setup items TopFeed4.3.1.20 TopFeed Menu Parameters 0mm-400mmSetup items PrintMode 4.3.2 Setup Menu 2/7Setup items 4.3.2.1 PrintMode Menu4.3.2.3 Condition Menu Setup itemsParameters DescriptionSetup items RepeatPrn Setup items DirectionSetup items Count 4.3.2.4 Direction MenuSetup items HeadSpeed Setup items IntervalTime4.3.2.7 IntervalTime Menu Parameters4.3.2.9 Weaving Menu Setup itemsParameters DescriptionUser Tip WeavingPrint Modes 2 pass4.3.2.11 Command Menu Setup items ScanWidthSetup items 4.3.2.10 ScanWidth MenuSetup items Setup items Step4.3.2.12 Step Menu ParametersSetup items 4.3.2.14 OnlineTimer MenuSetup items Layout Setup items JointSetup items Function Setup items CutPosSetup items 4.3.2.17 CutPos. Menu4.3.3.1 RollSetup Menu 4.3.3 Setup Menu 3/7Setup items ParametersSetup items Centro Setup items Roll4.3.3.2 Roll Menu ParametersSetup items Setup items4.3.3.4 Network Menu ParametersSetup items Setup items4.3.3.6 SubnetMask Menu ParametersSetup items 4.3.4 Setup Menu 4/74.3.4.1 Utility menu ParametersSetup items ErrorDisp 4.3.4.2 ErrorDisp. MenuSetup items ParametersSetup items OnCleaning 4.3.4.4 OnCleaning MenuSetup items MediaWidth ParametersSetup items Setup items4.3.4.8 AutoClean Menu Setup itemsSetup items Setup itemsSetup items 4.3.4.9 CapCycle MenuSetup items All Setup items4.3.4.12 Initial. Menu ParametersSetup items Setup items MediaSet4.3.4.16 Command Menu Setup items CommandSetup items Function Setup items Layout4.3.4.19 RollSetup Menu Setup items RollSetupSetup items Setup items CentroSetup items Utility 4.3.4.20 Centro. MenuSetup items 4.3.5 Setup Menu 5/74.3.5.1 DataDump Menu ParametersSetup items InkLoad Setup items HeadWash4.3.5.3 HeadWash Menu Parameters4.3.5.5 InkChange Menu Setup items InkChangeParameters Description4.3.5.6 Longstore Menu 8365/8390 Only Setup itemsParameters DescriptionSetup items ChipMgr Setup itemsMessage TimeSetup items H.Unlock 4.3.6 Setup Menu 6/74.3.6.2 WiperClean Menu Setup items4.3.6.3 TankCng. Menu Setup items TankCngParameters DescriptionSetup items Version Check 4.3.7 Setup Menu 7/7Setup items 4.3.7.1 VersionCheck Menu4.4.1 Feeding Media 4.4 OPERATING FROM THE CONTROL PANELSetup items Change Dist.Adj Parameters 90.00%-110.00%Setup items 4.4.2 Controlling the Heater Elements4.4.2.1 Change the heater temperature Key name4.4.2.3 Change the post fixer temperature 4.4.2.2 Change the fixer temperature4.4.2.4 Change the dryer temperature 4.4.2.5 Activate/ deactivate heaters4.4.3 Operating the Pressure Rollers 4.4.4 Print Mode CheckStatus of the printer Operation after the F4 key has been pressed4.5.1 Heaters are not Ready during Printing 4.5 CONTROL PANEL DURING PRINTING4.5.2 Heaters are Ready during Printing 1 On the fly step adjustmentsSetup items 2 Cleaning3 Adjust heaters Key name4.6.1 Cutting Media 4.6 OPERATIONS AFTER PRINTING5.1 INTRODUCTION 5 TROUBLESHOOTING5.2 FAILURES AND MALFUNCTIONS OF THE PRINTER 1 The printer does not work after the power has been turned onSolutions SolutionsSolutions SolutionsSolutions SolutionsSolutions 7 Media jams occur frequentlySolutions 10 The media is off or damaged when loading itPossible cause ReferencesSolutions SolutionsSolutions 11 Media is damaged during media InitialSolutions SolutionsSolutions 14 Media is crooked while printingSolutions SolutionsSolutions 21 Top Feed problem5.3.1 Status Messages 5.3 ERROR MESSAGESSolutions 1 Displays the operational statusSolutions 5.3.2 Error Message Display and Solutions1 Error messages regarding media feeding Solutions Reload the mediaSolutions Prepare a new ink cassette 2 Error messages regarding warnings of the remaining ink3 Other error messages Solutions5.3.4 Command Error Display and Solutions 5.3.3 Data Error Display and SolutionsMessage Online status I** Error SolutionSolutions 5.3.5 Error Requiring a Printer RestartMessage Descriptions5.4 WHEN MEDIA JAMS OCCUR 5 Troubleshooting This page has been intentionally left blank8265/8290/8365/8390 User Guide 6.2 8265/8290 PERIODIC MAINTENANCE 6 MAINTENANCE6.1 INTRODUCTION Maintenance cycles4. Solvent cleaning in a bottle 6.2.1 Weekly Maintenance6.2.1.1 Cleaning the edge of the cap and the area around the caps DescriptionIt is recommended to wear gloves 2 as shown on the picture below 6.2.1.2 Cleaning around the bottom of heads6.2.2 Bi-weekly Maintenance 6.2.2.1 Cleaning the wipersIt is recommended to wear gloves 6.2.3.1 Replacing the wipers 6.2.3 Monthly Maintenance6.2.3.2 Replacing the sponge in the spitting box 1 = Sponge 2 = Tweezers 3 = Gloves1 = Two holes 2 = Pin of black box 6.2.4.1 Change upper sponge at back of the capping station 6.2.4 Semi-Annual Maintenance7. Solvent cleaning in a bottle 6.3 8365/8390 PERIODIC MAINTENANCEN Action Frequency6.3.1 Daily Maintenance 6.3.1.1 Cleaning the wipersIt is recommended to wear gloves 6.3.1.3 Cleaning the edge of the cap 6.3.1.2 Tubing Flush and Maintenance Station Cap Flush6.3.2 Weekly Maintenance 6.3.2.1 Cleaning the area around the caps6.3.2.2 Cleaning around the bottom of heads It is recommended to wear gloves 2 as shown on the picture below 6.3.3.1 Replacing the sponge in the spitting box 6.3.3 Bi-weekly Maintenance6.3.4.1 Replacing the wipers 6.3.4 Monthly Maintenance6.3.4.2 Change upper sponge at back of the capping station Maintenance 6.4 AUTHORIZED SERVICE PROCEDURESN Action Month6.5.1 Replacing Ink Cassettes 6.5 REPLACING CONSUMABLES1 Replacement time 2 TypesOnly use 8265/8290/8365/8390 Ink and appropriate cleaning liquid 3 Replacement procedure6 Maintenance Step 4 Take the new ink cassette from its package Step 6 Close the cover of the ink compartment 1 Ink Compartment8265/8290/8365/8390 User Guide 6.5.2 Replacing the Cutting Blade 1 Replacement time2 Replacement procedure Step 6 Take out the cutting blade 6 Maintenance 1 Cutting blade holder lever 2 Cutting blade holderDo not touch the edge of the cutting blade to avoid injury Step 7 Insert the new cutter into the media cutting blade holder6.5.3 Replacing the Waste Tank 1 Replacement Time2 Replacement Procedures 6.6.1 Cleaning the Outer Case 6.6 CLEANING1 Cleaning frequency 2 Cleaning procedure6.6.3 Head Cleaning 6.6.2 Cleaning the Inside of the Printer1 Cleaning frequency 2 Cleaning procedureStep Step Step ParameterDescription 6 Maintenance Step 9 Perform a nozzle check again and check the print head8265/8290/8365/8390 User Guide 6.7 LONGSTORE PROCEDURE 6.7.1 Ready the Printer for LongStore6.7.2 Starting up after a LongStore 8265/8290/8365/8390 User Guide 6 Maintenance This page has been intentionally left blank7.1 UNI-DIRECTIONAL ADJUSTMENT 7 ADJUSTMENTS8265/8290/8365/8390 User Guide 7 Adjustments7.2 BI-DIRECTIONAL ADJUSTMENT 8265/8290/8365/8390 User Guide 7 Adjustments7.3 STEP ADJUSTMENT 7.3.1 Print the Dist.Check Test PatternStep 6 Press F3 Test Print 7 Adjustments 7.3.2 Evaluate the Dist. Check Test PatternExamples For print 1, the step is too small, overlap is visible Step overlap/Step too small PrintStep 2 Press F1 Cut&Feed Step 3 Press F2 Dist. Adj 7.3.3 Modify the Step Adjust Printer Setting7 Adjustments This page has been intentionally left blank8265/8290/8365/8390 User Guide 8.2 NETWORK INTERFACE SPECIFICATIONS 8.1 PRODUCT SPECIFICATIONS8 APPENDIX Specifications8 Appendix This page has been intentionally left blank8265/8290/8365/8390 User Guide Page USA 2008 by Xerox Corporation. All rights reserved Prepared by Xerox CorporationPrinted in the United States of America PANTONE is a registered trademark of Pantone, Inc