6 Maintenance
6.3.2Weekly Maintenance
At the end of the week, ink has to be removed from some parts, so it cannot harden. Otherwise, some parts will break down or result in bad print quality. After performing a weekly maintenance, do not forget to perform the daily maintenance afterwards.
6.3.2.1Cleaning the area around the caps
Step 1 : Power ON the printer.
Step 2 : Go to the H.Unlock Menu and press F2.
Step 3 : Open the Front Cover.
Step 4 : Slide the carriage to the left to access the capping station.
Step 5 : Clean the area around the caps with a
Step 6 : Close the Front Cover.
Step 7 : Press the [ENTER] key to exit the H.Unlock Menu. The carriage will cap in and be locked.
6.3.2.2Cleaning around the bottom of heads
Step 1 : Open the left maintenance covers by removing the four screws.
Step 2 : Power ON the printer.
Step 3 : Go to the H.Unlock Menu and press the F2 key to unlock the carriage.
8265/8290/8365/8390 User Guide | 115 |