TC Spool SN | The spool number | 18 |
TC Spool Correction | The spool correction factor | 8 |
TC Gauge | The gauge of the TCs | 2 |
Use Active TC | Use the active TC settings option | N/A |
Settings |
|
|
Check box 1 – | The active TCs for the survey | N/A |
Check box 40 |
|
|
SDS 8020 | SDS 8020 instrument option | N/A |
| (Version 1.101.0.76 & Below) |
|
SDS 8040 | SDS 8040 instrument option | N/A |
| (Version 1.101.0.76 & Below) |
|
Controller MFG | The controller manufacturer | 18 |
Controller Model | The controller make/model | 18 |
Instrument Type | The type of the instrument | 1 |
Cycle Time | The PID cycle time | 2 |
Dead Band | The PID dead band | 4 |
Output Limit | The PID output limit | 3 |
PB (Gain) | The PID PB (gain) | 5 |
Rate | The PID rate | 6 |
Reset | The PID reset | 6 |
Notes
Version 1.101.0.71 & Below
•When the SDS 8020 option is selected, the SDS software automatically fills in “20” in the “Number of TCs” field and Check boxes 21 through 40 (Boards 5 through 8) are disabled
•When the SDS 8040 option is selected, the SDS software automatically fills in “40” in the “Number of TCs” field and Check boxes 21 through 40 (Boards 5 through 8) are enabled
•When “20” is typed into the “Number of TCs” field, the SDS 8020 option is automatically selected, and Check boxes 21 through 40 (Boards 5 through 8) are disabled
Super Systems Inc. | Page 95 | SDS Data Logger Manual #4565 Rev D |