SDS:SP | Survey setpoint |
| <SDS:SP> |
SDS:TCN | Number of thermocouples | <SDS:TCN> | |
SDS:TCT | Thermocouple type |
| <SDS:TCT> |
SDS:TCS | Thermocouple spool number | <SDS:TCS> | |
SDS:TCC | Thermocouple calibrated by | <SDS:TCC> | |
SDS:TCCD | Thermocouple calibration date | <SDS:TCCD> | |
SDS:TCCF | Thermocouple spool correction factor | <SDS:TCCF> | |
SDS:SDN | Next survey due date |
| <SDS:SDN> |
SDS:SDSM | Survey box make/model |
| <SDS:SDSM> |
SDS:SDSS | Survey box serial number | <SDS:SDSS> | |
SDS:SDSC | Survey box calibrated by | <SDS:SDSC> | |
Tag | Description |
| Usage |
SDS:SDSCD | Survey box calibration date | <SDS:SDSCD> | |
SDS:SDSCF | Survey box correction factor | <SDS:SDSCF> | |
SDS:SPEC | Specifications the survey meets | <SDS:SPEC> | |
SDS:INT | Sample interval |
| <SDS:INT> |
SDS:T | Temperature character – F or C | <SDS:T> | |
SDS:SIM | Simulate load, in pounds | <SDS:SIM> | |
SDS:OVS | Overshoot (Deprecated) |
| <SDS:OVS> |
SDS:MIC | Microns |
| <SDS:MIC> |
SDS:RES | Survey result |
| <SDS:RES> |
SDS:GRAPH600x400 | Inserts a 600X400 image of the graph | <SDS:GRAPH600x400> | |
SDS:COM | Company name |
| <SDS:COM> |
SDS:UDUR | User defined survey duration | <SDS:UDUR> | |
SDS:UTCN | User defined number of thermocouples | <SDS:UTCN> | |
SDS:PCT | PID cycle time |
| <SDS:PCT> |
SDS:PDB | PID dead band |
| <SDS:PDB> |
SDS:POL | PID output limit |
| <SDS:POL> |
SDS:PPB | PID PB (gain) |
| <SDS:PPB> |
SDS:PR | PID rate |
| <SDS:PR> |
SDS:PRE | PID reset |
| <SDS:PRE> |
SDS:CMF | Temperature controller manufacturer | <SDS:CMF> | |
SDS:CMA | Temperature controller make/model | <SDS:CMA> | |
SDS:IT | Controller instrument type | <SDS:IT> | |
SDS:TCG | Thermocouple gauge |
| <SDS:TCG> |
SDS:OV | Overshoot - yes or no |
| <SDS:OV> |
SDS:OD | Outputs TC and temp if overshoot occurred | <SDS:OD> | |
SDS:OVT | Time the overshoot occurred | <SDS:OVT> | |
SDS:CTD | Inserts a note regarding the control | <SDS:CTD> | |
| Thermocouple. Inserts nothing if no control |
| |
| Thermocouple was chosen |
| |
SDS:CTN | Control thermocouple. Inserts “None” if <SDS:CTN> | ||
| None is defined |
|
|
°# | °degree type |
| °# |
SDS:ED | Survey end date |
| <SDS:ED> |
SDS:ET | Survey end time |
| <SDS:ET> |
SDS:TCM | Thermocouple map (image) | <SDS:TCM> | |
SDS:UD1 | User defined field | 1 | <SDS:UD1> |
SDS:UD2 | User defined field | 2 | <SDS:UD2> |
SDS:UD3 | User defined field | 3 | <SDS:UD3> |
SDS:UD4 | User defined field | 4 | <SDS:UD4> |
SDS:UD5 | User defined field | 5 | <SDS:UD5> |
SDS:UD6 | User defined field | 6 | <SDS:UD6> |
|
|
| |
Super Systems Inc. | Page 71 | SDS Data Logger Manual #4565 Rev D | |