Status Information
What do you want to do?
The following information is shown in the Job History:
•'Status' indicates the status of the print connection. The following statuses are possible:
'Completed' means that the TPG60 has completely forwarded the print job to the printer.
'Pending' means that the print job has been accepted by the TPG60 but that the data transfer has not yet started.
'Processing' means that the print job has been transferred from the TPG60 to the printer.
'Processing stopped' means that the data transfer to the printer has been stopped. This can occur if, for example, the printer ran out of paper. If the printer error is fixed, data transfer will be resumed.
'Aborted' means that the print job has been aborted. This can occur if, for example, the TPG60 has been restarted while the print job was processed.
•'Protocol' indicates the protocol which has been used for transferring the print data.
•'Name' displays the name of the print job.
•'Sender' displays the IP address of the host.
•'Size' indicates the size (in KB) of the print job. The minimal size that is displayed is 1 KB.
•'Printer ID' specifies the identification number and the name of the printer that spooled the print job.
•'Creation time' specifies the time at which the print job was sent to the TPG60.
•'Duration' indicates the time needed by the TPG60 for processing the print job. The minimal duration that is displayed is 1 second.
3.3How to Print a Status Page?
The status page contains all the important information about the TPG60. Before a status page can be printed, you need to specify the printer and the data format of the status page. The data formats ASCII, PostScript, and DATAMAX are available. The default setting is the printer with the ID 1.
’Specifying the Data Format and the Printer via the TPG Homepage’ Ö27
TPG60 User Manual | 26 |